- Help 2010 Sport Caliper Failure
- Help Independent mechanic recommendation needed Troy Michigan control arms change
- Help Sedan and convertible
- Help G37 rwd sedan seeking strut tower recommendation
- Power steering rack hard lines
- Brake bleeding question
- New Stillen Sway Bars on G37S RWD Sedan
- Help Seeking recommendation for autoshops for coilover installation in LA
- Suspension Options
- Loosened wrong caliper bolts - Torque spec?
- Shock/Strut recommendations
- Help Rear Caliper Pin Seized - Heat Induction Tool
- Help Brake switch sensor
- Curved rear camber arms vs. straight
- Help Does the BC Racing coilover need the OEM mount?
- Front LCA Bushings
- Caliper Color for Socketz67
- 2012 Infiniti g37xs with extremely twitchy steering on interstate
- The OEM+/Comfort S Sedan Coilover Thread
- Help Tein Flex Z - clunking up front after install
- Help Air Suspension
- Help Bouncy Suspension
- C2B Suspension
- Help Suspension Squeak
- 2010 G37x Coupe Godspeed camber rod question
- DOT3 vs DOT4 vs DOT 5.1
- Help End-Link Upgrades
- AWD coilovers
- Creaking after Steering Rack Replacement
- G37x adjustable dampening struts to pair with stock springs
- Painted Caliper Project
- Z1 Forged Akebono Calipers
- Coilover and rear toe arm help
- I can't figure it out: Thicker xS Coupe Rear Sway Bar
- Help Do I need a camber kit if I’m installing coilovers?
- Help Need help finding this Rear Lower spring bucket control arms Left side
- 2010 G37x Caliper bracket?
- Remanufactured vs. New Rack & Pinion
- Rack and Pinion Leak/Moist FIX
- Do I need a Rack & Pinion replacement?
- Corrections to Alignment
- Looking for recommendations for alignment correction
- Help Swift Lowering Springs
- Stock 370GT whack alignment
- Help Sway bar woes
- Brake Piping
- Help Rotor Size 2011 Sport Sedan
- C1155: ABS, Brake, Anti Slip, VDC Lights On
- Lowering questions
- Are awd and rwd Struts the same? will they bolt in the same.
- Non-sport brakes recommendations
- Help G37X Sedan - Help Finding Part Number for Rear Akebono Pads Please
- Help G37X Sendan - Which After Market Caliper Slide Pin Boot / Bushing Fits?
- OEM brakes/rotors failed 2x
- Mevotech Adjustable Upper Control Arms
- Help Concern about air in my brake lines
- How Often Do You Adjust the Handbrake?
- Help G37 Toe in After Accident, Suggestions?
- Help tein s spec lowering springs & 20mm spacers all around without a camber kit
- 2012 G37 Sedan Journey RWD replacing struts
- Caliper and Rotor size
- Help Hotckins Sway Bar G37 X Sedan
- Help got fortune 500's car drives like sh*t
- Spinning lug nut and stud
- Raise the car with KW K1 Coilovers
- G37s 2010 Rack and pinion Leak minor
- Help G37X Rear caliper brake line connection hard to remove
- Help Does BC racing coils still have a clunking noise problem or has that been fixed?
- Brand new pads and rotors squeaking
- AWD front axle spacers? Or front diff spacer?
- G37X Sedan - Rotor Choices
- Help Any tips on adjusting new suspension before alignment appointment?
- Bleeding Brakes
- Brand new drilled and slotted rotors and pads making weird noise
- Help Lower Control Arm Bolt Removal
- Help Rear camber can’t be fixed
- Brakes causing rust
- adjusting toe with camber arms
- Koni Shocks for G37x sedan
- From Stop Tech BBK to Akebonos
- Help Loose wheel after curb crash
- Initial Brake Squeal - Z1 Slotted Rotors, Akebono Pads
- Question on BBKs
- G37X Coupe Akebono swap question
- 2008 G37 coupe camber
- ALIGNMENT Settings & Thoughts?
- Help Cost and difficulty of DIY shocks/strut replacement for 08 g37s?
- Lower Control Arm bushing
- Heavy steering
- Help Caliper/system flush hints
- Complete Rear Suspension Overhaul
- How many banjo bolts should I order for BBK install?
- Bolt Size for use in the Rotor Extraction Helper hole?
- Help Front brake pads getting hot and traction control light staying on
- Akebono big brake set on 17inch rims ?
- Do I need aftermarket sway bars?
- Help What stock wheels can clear the Akebonos?
- Japanese Supplier Akebono Admits to Falsifying Data
- Transmission Mount Questions
- Help Brake Squeal and ITB11-050 for caliper pins