Looking at a set of squared 10.5 CVTs ET45 with Eibach drop on a sedan. I am planning on getting 285/30/20 for rear tires and am not sure what size tires I can fit up front without too much stretching. Any suggestions?

 

Will I have any rubbing issues running 19x9.5 +35 on an X coupe? Lowered on Eibach camber kit in the rear; front kit coming this spring.

 

Check Lt8che coupe specs, 9.5 +30 running 265s, you'll be 5mm in from that setup on 265/35/19s so would be a good fit.
https://www.myg37.com/forums/brakes-...ml#post3815735

 

Lt8che set up is the flush look I am going for but he is running 18's, good to know I will not have issues on 19s. Thanks

 

Yep, with the 19s and in that tire size you'll have the same overall diameter and tread block so the fit will be nearly identical.

 

I believe lt8che also ran 19's at one point. look up his set up with his Work wheels

 

I ran 20's with the Works. 20x9 +38 245/35/20. Needed 15mm spacers for the rears to bring them flush and kept the fronts a little tucked.

The 18 set-up with the Forgestars is perfect though.

 

Hey guy I have a 2010 g37x coupe I am lowered on elibach springs little under a 2" drop I'm the market for new wheels looking for a straight concave look I was wondering if 20x11 offset 25 and 245/35/20 tires cause any rubbing or if there would be issuse?

 

[QUOTE=jhovanyrod;3867334]Hey guy I have a 2010 g37x coupe I am lowered on elibach springs little under a 2" drop I'm the market for new wheels looking for a straight concave look I was wondering if 20x11 offset 25 and 245/35/20 tires cause any rubbing or if there would be issuse?

 

[QUOTE=jhovanyrod;3867540]Check reply here, please only post question once, or bump an old post rather than posting same question over several threads, thanks!
https://www.myg37.com/forums/brakes-...ml#post3867635

 

I am looking to get a square set of 20x10s in the spring. I am running eibach prokit with 20mm spacers all round. I'm curious if I could run this wide leaving the spacers on and what a good offset would be. Also could I run a non-stretched tire?

 

Without the spacers it's going to be tight, running 10" +35 on 265/30/20 would be about as aggressive as I'd recommend (and no spacers)

 

i'm thinking of going with a 19x10 +22 square setup on my s coupe but don't want any issues with the front.

I'll be running bc coils and both front/rear spc camber kits. any input?

 

You'll have to run a stretched tire setup, might check this thread for a square setup w/ similar specs, I know you're not AWD but you'll see more squared setups there~

https://www.myg37.com/forums/g37-cou...37x-coupe.html
Here's a post in that thread that is close to what you're asking
https://www.myg37.com/forums/g37-cou...ml#post3818456

 

hmm, thanks for the links. i found someone running 19x10 +18 with 245/40 and 255/35. Do you think the front will clear if i try and run 255/35 all around on the 19x10?

otherwise I think i'm might end up going with 19x9.5 + 22 F and 19x10.5 +22 R with 245/35 and 275/30 tires. Not sure which setup would work better