09BlkObsSdn

Looking at a set of squared 10.5 CVTs ET45 with Eibach drop on a sedan. I am planning on getting 285/30/20 for rear tires and am not sure what size tires I can fit up front without too much stretching. Any suggestions?

ai3j50

Will I have any rubbing issues running 19x9.5 +35 on an X coupe? Lowered on Eibach camber kit in the rear; front kit coming this spring.

blnewt

iTrader: (13)

Check Lt8che coupe specs, 9.5 +30 running 265s, you'll be 5mm in from that setup on 265/35/19s so would be a good fit.
https://www.myg37.com/forums/brakes-...ml#post3815735

ai3j50

Lt8che set up is the flush look I am going for but he is running 18's, good to know I will not have issues on 19s. Thanks

blnewt

iTrader: (13)

Yep, with the 19s and in that tire size you'll have the same overall diameter and tread block so the fit will be nearly identical.

ChinkyChoy

iTrader: (2)

I believe lt8che also ran 19's at one point. look up his set up with his Work wheels

Lt8Che

iTrader: (6)

I ran 20's with the Works. 20x9 +38 245/35/20. Needed 15mm spacers for the rears to bring them flush and kept the fronts a little tucked.

The 18 set-up with the Forgestars is perfect though.

jhovanyrod

iTrader: (2)

Hey guy I have a 2010 g37x coupe I am lowered on elibach springs little under a 2" drop I'm the market for new wheels looking for a straight concave look I was wondering if 20x11 offset 25 and 245/35/20 tires cause any rubbing or if there would be issuse?

jhovanyrod

iTrader: (2)

[QUOTE=jhovanyrod;3867334]Hey guy I have a 2010 g37x coupe I am lowered on elibach springs little under a 2" drop I'm the market for new wheels looking for a straight concave look I was wondering if 20x11 offset 25 and 245/35/20 tires cause any rubbing or if there would be issuse?

blnewt

iTrader: (13)

[QUOTE=jhovanyrod;3867540]Check reply here, please only post question once, or bump an old post rather than posting same question over several threads, thanks!
https://www.myg37.com/forums/brakes-...ml#post3867635

thisISit

iTrader: (1)

I am looking to get a square set of 20x10s in the spring. I am running eibach prokit with 20mm spacers all round. I'm curious if I could run this wide leaving the spacers on and what a good offset would be. Also could I run a non-stretched tire?

blnewt

iTrader: (13)

Without the spacers it's going to be tight, running 10" +35 on 265/30/20 would be about as aggressive as I'd recommend (and no spacers)

Purist

iTrader: (1)

i'm thinking of going with a 19x10 +22 square setup on my s coupe but don't want any issues with the front.

I'll be running bc coils and both front/rear spc camber kits. any input?

blnewt

iTrader: (13)

You'll have to run a stretched tire setup, might check this thread for a square setup w/ similar specs, I know you're not AWD but you'll see more squared setups there~

https://www.myg37.com/forums/g37-cou...37x-coupe.html
Here's a post in that thread that is close to what you're asking
https://www.myg37.com/forums/g37-cou...ml#post3818456

Purist

iTrader: (1)

hmm, thanks for the links. i found someone running 19x10 +18 with 245/40 and 255/35. Do you think the front will clear if i try and run 255/35 all around on the 19x10?

otherwise I think i'm might end up going with 19x9.5 + 22 F and 19x10.5 +22 R with 245/35 and 275/30 tires. Not sure which setup would work better