im lowered on swifts. no camber kits

 

need to know the offset to determine if it will fit

 

Offset should be stamped inside the wheel, if it's a +40 offset it could also be listed as
ET 40.

 

I ended up passing on them.will look at something a little less than 10.5 next time

 

Yeah, there's not much room for error going w/ 10.5s all around, let us know what you end up doing or if you have any other setup questions.

 

How did this turn out?

 

Anyone here running 19x9.5 all around with 35mm offset? I'm planning on this with my 11X sedan on Swifts, oem camber and 255/40 tires. Any thoughts about clearance issues on the front?

 

Look at the first post my 2nd set up is exactly what youre asking

 

I saw that but links to pictures are not working. Is the one below the same wheel with spacers? What size tires?

 

I ll try to fix the broken links later


the volks are 19x9.5 +35 all around
the Works are 19x9.5 +25 all around


The tire size is 245/40 all around for all my set ups.

 

Would like to see the pictures of +35 as well.

 

sorry totally blanked on this thread.


I have been using facebook to share images which doesn't work out so well since they keep changing the address and it breaks the link. I ll save everything to Flickr and relink them tonight

 

With 19x9.5 +35 all around on a sedan are you still in spec with camber? or do you need camber kit at this point?

 

not sure cause i installed the camber kit when i installed the coils. My current specs are around -2 in the front and -3 in the rear but thats with +25

working on getting the pix fixed right now

 

updated first post with new pix