My RB Project, going all in!
Thread Starter
Administrator
Joined: Aug 2008
Posts: 12,173
Likes: 244
From: Doha, Qatar
When I started this build I created an excel sheet to keep track of all parts and labor expenses. When my unopened engine took a dump on the dyno and I had to get it built, I stopped counting and deleted that sheet haha.
I leased a Nissan Micra 
Turning up the boost! 
Also what did you drive on the down time, you have a second vehicle.
Sorry if this has been asked/answered already.
I'm glad you got all the kinks worked out, what's your next stage?
I'm glad you got all the kinks worked out, what's your next stage?
Don't feel bad I destroyed a perfectly good vhr motor.
Was just curious, must admit you've done it to the fullest.
Sometimes you've got to break done eggs to get that omelet.
I'm sure you will get it sorted out, good luck with buttoning up the rest of your build.
Hopefully all goes well.
Was just curious, must admit you've done it to the fullest.
Sometimes you've got to break done eggs to get that omelet.
I'm sure you will get it sorted out, good luck with buttoning up the rest of your build.
Hopefully all goes well.
Thread Starter
Administrator
Joined: Aug 2008
Posts: 12,173
Likes: 244
From: Doha, Qatar
Quick Update:
Replaced my busted CF mufflers (broke my Driveshaft a while back) with brand new SS mufflers from Fast Intentions and RB sounds like it should again (the exhaust leak drove me insane). Also wired an Innovative MLX Wideband into my Adaptronic ECU (best investment ever) and what a difference! A few datalogs later, I put together a quick conservative tune for the road and slowly cranked it up to 25 psi
There's more room to go but I'll keep that till I upgrade the cooling to get it on the dyno.
In the meantime, enjoy another one of my ghetto video! (My neighbors sure didn't
)
Replaced my busted CF mufflers (broke my Driveshaft a while back) with brand new SS mufflers from Fast Intentions and RB sounds like it should again (the exhaust leak drove me insane). Also wired an Innovative MLX Wideband into my Adaptronic ECU (best investment ever) and what a difference! A few datalogs later, I put together a quick conservative tune for the road and slowly cranked it up to 25 psi
There's more room to go but I'll keep that till I upgrade the cooling to get it on the dyno.In the meantime, enjoy another one of my ghetto video! (My neighbors sure didn't
)
Registered Member
Joined: Nov 2010
Posts: 4,421
Likes: 91
From: Dubai, UAE
Quick Update:
Replaced my busted CF mufflers (broke my Driveshaft a while back) with brand new SS mufflers from Fast Intentions and RB sounds like it should again (the exhaust leak drove me insane). Also wired an Innovative MLX Wideband into my Adaptronic ECU (best investment ever) and what a difference! A few datalogs later, I put together a quick conservative tune for the road and slowly cranked it up to 25 psi There's more room to go but I'll keep that till I upgrade the cooling to get it on the dyno.
In the meantime, enjoy another one of my ghetto video! (My neighbors sure didn't)
G37 RB30DET - PTE6266 - YouTube
Replaced my busted CF mufflers (broke my Driveshaft a while back) with brand new SS mufflers from Fast Intentions and RB sounds like it should again (the exhaust leak drove me insane). Also wired an Innovative MLX Wideband into my Adaptronic ECU (best investment ever) and what a difference! A few datalogs later, I put together a quick conservative tune for the road and slowly cranked it up to 25 psi
There's more room to go but I'll keep that till I upgrade the cooling to get it on the dyno.In the meantime, enjoy another one of my ghetto video! (My neighbors sure didn't
)G37 RB30DET - PTE6266 - YouTube
Oh damn, what exhaust is that? I want my G to sound the same!
Thread Starter
Administrator
Joined: Aug 2008
Posts: 12,173
Likes: 244
From: Doha, Qatar
Haha why are you guys making it sound like it I kept it a secret. I always posted pics of what I was doing. In my signature you can also see a link to Quick Specs with a summary of everything I've done.