G37 Sedan

What did you do to your Sedan today?

Old Feb 11, 2019 | 07:05 PM
  #6241  
Epiphany's Avatar
Epiphany
Registered Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: May 2015
Posts: 1,732
Likes: 244
From: Alberta
Picked up a new set of winters today. Thought I'd get through this winter but after 6 seasons my current winters were useless. Got some X-Ice 3's on sale. Now that I've put money into a new set of tires it should be easier to justify keeping the car longer as I'd been thinking about getting rid of it this summer.
Reply
Old Feb 12, 2019 | 06:42 PM
  #6242  
cmckenzie15's Avatar
cmckenzie15
Registered Member
 
Joined: Dec 2017
Posts: 157
Likes: 57
From: MA
Originally Posted by Rochester
3 years ago or so, I had a local shop give me a quote for painting the calipers. High-temp paint of my choice, not powdercoat, and done on-the-car, by masking the hell out of everything. It's a reputable shop, and they do high-end cars (Astons, Lambos, etc.), but still I was thinking at the time I'd prefer if the calipers were powdercoated while off-the-car. Anyway, they wanted $600 for the whole job, 90% of which is probably prep work. That felt a little high (I was thinking $400), and I never pursued it again.
Jesus that’s insane, I wonder if they did them in house or not or all that cost was for them to send it out somewhere. I know one shop I called said they don’t do it in house and it’ll be more expensive if someone who does. Luckily I found from a a couple buddies this dude who doesn’t have a website and this little shop he does bike parts mainly and some industrial. So I’m guessing he’s just charging me labor and powder. I want powder coat just for the longevity of it and also can’t really find the colors I want in a can to paint them.
Reply
Old Feb 12, 2019 | 07:32 PM
  #6243  
Rochester's Avatar
Rochester
Administrator
15 Year Member
Loved
Community Favorite
Top Answer: 1
iTrader: (9)
 
Joined: Nov 2010
Posts: 19,829
Likes: 5,137
From: Rochester, NY
Originally Posted by cmckenzie15
Jesus that’s insane, I wonder if they did them in house or not or all that cost was for them to send it out somewhere.
In-house. Brakes stay on the car, and they mask everything, car too, I suppose. I'd rather the brakes were off the car. However, the odds are slim that I'd remove the brakes myself and hand them to someone, so that means a shop that wouldn't mind it being on the lift (or jackstands) while the calipers were getting painted.

The overall cost isn't so much the problem, it's the logistics of the project. I haven't got that figured out.

IIRC, it was these guys here: http://titanmotorworks.com/

Last edited by Rochester; Feb 12, 2019 at 07:37 PM.
Reply
Old Feb 12, 2019 | 08:59 PM
  #6244  
iCrap's Avatar
iCrap
Registered Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Nov 2015
Posts: 3,514
Likes: 610
From: Maryland
So i think i screwed up one of my calipers. I used acetone to clean up some overspray on one and it made the finish kinda dull and soft. Dunno what to do now.... maybe clearcoat over it?
Reply
Old Feb 12, 2019 | 09:28 PM
  #6245  
mathnerd88's Avatar
mathnerd88
Registered Member
iTrader: (1)
 
Joined: Sep 2010
Posts: 363
Likes: 21
From: Boston, MA
Just installed an OEM mirror with a compass in my G37x. Easy install, took less than 5 minutes, direct plug and play. Got one of the used ones on Ebay for $35. The mirror came from a G25.

The Nav models do not get a compass, and I missed the compass in my old 07 g35x before it was totaled.
Reply
Old Feb 12, 2019 | 10:17 PM
  #6246  
qmantran's Avatar
qmantran
Registered Member
 
Joined: Apr 2015
Posts: 1,153
Likes: 183
From: ATX
18x9 +35 RPF1 for the rears. 17.2lbs

I will be weighing the oem rear 18x8.5 +50 duck feet rwd S wheels tomorrow. Everyone says it's 25lbs for the rear. Tomorrow I will find out.
Reply
Old Feb 12, 2019 | 10:48 PM
  #6247  
SupraOfDoom's Avatar
SupraOfDoom
Registered Member
 
Joined: Jun 2016
Posts: 1,071
Likes: 254
From: Milwaukee WI
That's the wheel I originally wanted but I decided to go more of a street car style build so the wheel weight wasn't top of my list anymore. Got some big ol wheels now but they are light for the size at least.
Reply
Old Feb 12, 2019 | 11:21 PM
  #6248  
qmantran's Avatar
qmantran
Registered Member
 
Joined: Apr 2015
Posts: 1,153
Likes: 183
From: ATX
Originally Posted by SupraOfDoom
That's the wheel I originally wanted but I decided to go more of a street car style build so the wheel weight wasn't top of my list anymore. Got some big ol wheels now but they are light for the size at least.

I was also stuck in the cross roads with my car. I was debating to drop the car on coilovers and get 19" wheels with a polished/mirror lip. But that also involved spending $500 in alignment components to address camber and rear toe. That's $3k minimum invested there using cheap coilovers and wheels. More like $4k with quality parts.

I ultimately decided I wanted to make it more fun to drive. I used to own a lowered 2008 Acura TL. Been there and know what it's like to drive on unfamiliar roads. Looks good to be lowered and nice wheels, but you really have to be cautious while driving.

I go to Mexico every other weekend so it only makes sense to go faster.

Just ordered ISR resonated test pipes to replace my fast-intentions high flow cats. Combined with the admin tune it should spit some fire. 3" intakes are being shipped end of this week. Hoping to go back for another dyno Feb 23 for after results.
Reply
Old Feb 12, 2019 | 11:28 PM
  #6249  
Rochester's Avatar
Rochester
Administrator
15 Year Member
Loved
Community Favorite
Top Answer: 1
iTrader: (9)
 
Joined: Nov 2010
Posts: 19,829
Likes: 5,137
From: Rochester, NY
Originally Posted by qmantran
18x9 +35 RPF1 for the rears. 17.2lbs

I will be weighing the oem rear 18x8.5 +50 duck feet rwd S wheels tomorrow. Everyone says it's 25lbs for the rear. Tomorrow I will find out.
That's what I always thought about the duckfeet... the 18x7.5" are 24 pounts, and the 18x8.5" are 25 pounds.

Dropping 8 pounds per wheel, while increasing the width 1/2"... not too shabby, qmantran.

How about the tires? Different make/model tires all weigh differently, too. One of the benefits of the Michelin sport tire was that it was relatively lightweight.
Reply
Old Feb 12, 2019 | 11:46 PM
  #6250  
SupraOfDoom's Avatar
SupraOfDoom
Registered Member
 
Joined: Jun 2016
Posts: 1,071
Likes: 254
From: Milwaukee WI
I personally opted for the Z1 2 piece rotors to make up for the weight of the larger wheels. 8-10 lbs per corner, that way I can still run some big wheels and fat tires without having to also break the bank for the light weight wheel premium.

I haven't ordered tires yet either, but even if they weigh a lot the price on the Nitto NT555 G2's is hard to beat. Anyone else have recommendations for alternatives but in a wide range of sizes, that won't break the bank? Sizes I'm looking for are 265/35/20 and 315/30/20.
Reply
Old Feb 13, 2019 | 12:24 AM
  #6251  
qmantran's Avatar
qmantran
Registered Member
 
Joined: Apr 2015
Posts: 1,153
Likes: 183
From: ATX
Originally Posted by Rochester
That's what I always thought about the duckfeet... the 18x7.5" are 24 pounts, and the 18x8.5" are 25 pounds.

Dropping 8 pounds per wheel, while increasing the width 1/2"... not too shabby, qmantran.

How about the tires? Different make/model tires all weigh differently, too. One of the benefits of the Michelin sport tire was that it was relatively lightweight.

I will be transferring over my current 245/45-18 continental dws06 tires that still have 5/32nds tread left. TireRack says that tire is 25lbs new.

once they wear down I plan to get 275/40-18 general g-max a/s for the rears. Those say 26lbs new.

tomorrow I will be weighing the duck feet with dws06 mounted, duck feet alone and tire alone.
Reply
Old Feb 13, 2019 | 01:06 AM
  #6252  
slartibartfast's Avatar
slartibartfast
Super Moderator
10 Year Member
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: Oct 2014
Posts: 6,105
Likes: 842
From: Houston, Tx
Originally Posted by iCrap
So i think i screwed up one of my calipers. I used acetone to clean up some overspray on one and it made the finish kinda dull and soft. Dunno what to do now.... maybe clearcoat over it?
Give it a few days or bake it for a few hours and maybe drive off the acetone. Not too hot, you don't want to damage the piston seals.
Reply
Old Feb 13, 2019 | 01:10 PM
  #6253  
qmantran's Avatar
qmantran
Registered Member
 
Joined: Apr 2015
Posts: 1,153
Likes: 183
From: ATX


Reply
Old Feb 13, 2019 | 05:28 PM
  #6254  
iCrap's Avatar
iCrap
Registered Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Nov 2015
Posts: 3,514
Likes: 610
From: Maryland
Originally Posted by slartibartfast


Give it a few days or bake it for a few hours and maybe drive off the acetone. Not too hot, you don't want to damage the piston seals.
I think im gonna end up repainting them now anyways. i took one outside and put it next to my car.... I don't think it goes very well. Never mind the junk winter wheels (summer wheels are silver 19"s)
Should I do orange, yellow, bronze? Can't decide...




Reply
Old Feb 14, 2019 | 12:44 AM
  #6255  
PNW_IPL's Avatar
PNW_IPL
Registered Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Mar 2016
Posts: 3,050
Likes: 547
Originally Posted by iCrap
I think im gonna end up repainting them now anyways. i took one outside and put it next to my car.... I don't think it goes very well. Never mind the junk winter wheels (summer wheels are silver 19"s)
Should I do orange, yellow, bronze? Can't decide...
yellow.
what are you doing for lines pads and rotors?


today i test fit a 10mm spacer

Last edited by Rochester; Feb 14, 2019 at 06:57 AM. Reason: fixed quote tags
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 04:13 PM.