G37 Coupe

Q60 Final Teaser - Revealed in Detroit

Thread Tools
 
Search this Thread
 
Old Jan 12, 2015 | 01:08 AM
  #151  
mj_39's Avatar
mj_39
Registered User
iTrader: (4)
 
Joined: Jan 2010
Posts: 522
Likes: 42

Last edited by mj_39; Jan 12, 2015 at 01:25 AM.
Old Jan 12, 2015 | 09:04 AM
  #152  
InfinitiFreak's Avatar
InfinitiFreak
Moderator
 
Joined: Aug 2005
Posts: 1,148
Likes: 36
From: Houston, TX
I am really starting to want this to be my next car! I really hope that they offer the DCT!!
Old Jan 12, 2015 | 11:26 AM
  #153  
DYT-350Z's Avatar
DYT-350Z
Registered User
 
Joined: Apr 2014
Posts: 107
Likes: 15
From: Raleigh, NC
Giggity Giggity

Except it's kind of like a super hot chick with a weird looking rear end... you ask yourself if you can look past it, and try to focus on the positives.
Old Jan 12, 2015 | 12:06 PM
  #154  
serega13's Avatar
serega13
Registered User
iTrader: (2)
 
Joined: Oct 2013
Posts: 379
Likes: 53
3.0TT engine confirmed now. Looks like it will be the same MB engine, possibly built by Nissan in Tennessee alongside MB\Nissan 2.0T venture, it makes 329hp in C400 and 362hp 384 lb-ft in C450 with higher boost. They will probably do 329hp in a regular trim Q60 and 362hp in IPL version. C class Mercedes does 0-60 in 5.2 sec with 329hp version and 4.9 sec with 362hp version, Q60 might be a tad faster because it should be a bit lighter due to utilizing more aluminum and carbon fiber.
Old Jan 12, 2015 | 12:06 PM
  #155  
n_jay888's Avatar
n_jay888
Registered User
iTrader: (2)
 
Joined: Dec 2006
Posts: 5,374
Likes: 6
From: Northridge, CA
I hope it has DAS, so everybody can stop complaining about it. LOL
Old Jan 12, 2015 | 12:12 PM
  #156  
Rochester's Avatar
Rochester
Administrator
15 Year Member
Loved
Community Favorite
Top Answer: 1
iTrader: (9)
 
Joined: Nov 2010
Posts: 19,859
Likes: 5,149
From: Rochester, NY
Originally Posted by serega13
it makes 329hp
That's a bit of cold water on otherwise exciting news.

Isn't today's Coupe marketed as 330hp?
Old Jan 12, 2015 | 12:19 PM
  #157  
skyline_nismo's Avatar
skyline_nismo
Registered User
 
Joined: Dec 2014
Posts: 32
Likes: 2
Originally Posted by serega13
3.0TT engine confirmed now. Looks like it will be the same MB engine, possibly built by Nissan in Tennessee alongside MB\Nissan 2.0T venture, it makes 329hp in C400 and 362hp 384 lb-ft in C450 with higher boost. They will probably do 329hp in a regular trim Q60 and 362hp in IPL version. C class Mercedes does 0-60 in 5.2 sec with 329hp version and 4.9 sec with 362hp version, Q60 might be a tad faster because it should be a bit lighter due to utilizing more aluminum and carbon fiber.
Are we sure about this? From what I read the 3.0L TT is part of a newly developed family of Nissan engines, not part of the Daimler AG partnership.
Old Jan 12, 2015 | 12:24 PM
  #158  
Black Betty's Avatar
Black Betty
Lexus Defector
iTrader: (60)
 
Joined: Sep 2007
Posts: 21,148
Likes: 2,093
Originally Posted by serega13
3.0TT engine confirmed now. Looks like it will be the same MB engine, possibly built by Nissan in Tennessee alongside MB\Nissan 2.0T venture, it makes 329hp in C400 and 362hp 384 lb-ft in C450 with higher boost. They will probably do 329hp in a regular trim Q60 and 362hp in IPL version. C class Mercedes does 0-60 in 5.2 sec with 329hp version and 4.9 sec with 362hp version, Q60 might be a tad faster because it should be a bit lighter due to utilizing more aluminum and carbon fiber.
Uh, no I don't think so. Were did this information come from? Why would a 3.0l direct injected TT engine make less HP than a NA 3.7l one? It was confirmed that the 3.0L TT it uses is a brand new engine developed by Nissan.
Old Jan 12, 2015 | 12:38 PM
  #159  
VQHRLover's Avatar
VQHRLover
Registered Member
 
Joined: Sep 2012
Posts: 68
Likes: 7
From: Vancouver BC
the 2 litre turbocharged engine is part of the Daimler AG partnership. Not the 3.0. I am happy Infiniti finally went with the route of turbocharging their motors(excluding GTR). Hopefully it meets expectations and comes with a DCT/6MT to make me switch back. If it does produce "less" horsepower likely it will be underrated from the factory. For example in the B7 S4 it produced 343 Horsepower and in the B8 chassis the supercharged motor only produced 333BHP. When put on a dyno this was proven to be highly underrated as people were getting close to crank numbers to the wheels. It could be a very similar case with Infiniti though again we don't have any numbers so this is all speculation.
Old Jan 12, 2015 | 01:01 PM
  #160  
serega13's Avatar
serega13
Registered User
iTrader: (2)
 
Joined: Oct 2013
Posts: 379
Likes: 53
Originally Posted by Black Betty
Uh, no I don't think so. Were did this information come from? Why would a 3.0l direct injected TT engine make less HP than a NA 3.7l one? It was confirmed that the 3.0L TT it uses is a brand new engine developed by Nissan.
3.0TT info comes from here: Infiniti Q60 Concept previews sexy styling, twin-turbo V6

I don't know for a fact that it comes from MB, that part I assumed based on their building 2.0T together in Tennessee.
Old Jan 12, 2015 | 02:12 PM
  #161  
Herostar's Avatar
Herostar
Registered Member
10 Year Member
Liked
 
Joined: Oct 2014
Posts: 128
Likes: 6
From: Denver, CO
Looks great! I'm excited about the turbos, MT says they expect it to be about 375 hp.

Here's some more info/pix
Infiniti Q60 Concept First Look - Motor Trend
Old Jan 12, 2015 | 02:15 PM
  #162  
Black Betty's Avatar
Black Betty
Lexus Defector
iTrader: (60)
 
Joined: Sep 2007
Posts: 21,148
Likes: 2,093
Originally Posted by serega13
3.0TT info comes from here: Infiniti Q60 Concept previews sexy styling, twin-turbo V6

I don't know for a fact that it comes from MB, that part I assumed based on their building 2.0T together in Tennessee.
Quotes from the link story:
introducing a new family of 3.0-liter, twin-turbocharged V6 engines.
Under the Q60 Concept's hood is the same 3.0-liter, twin-turbocharged V6 that was first shown on the Q80 Inspiration Concept from the 2014 Paris Motor Show. According to Infiniti, the direct-injected six-pot will arrive in a production car within the next two years.

Here's info regarding the engine in the Q80 Inspiration Concept from a MT article late last year.
The Q80 Inspiration runs a brand-new 3.0-liter V-6 with twin turbos, plus a hybrid system. The V-6 makes 440 hp alone, giving an electrically boosted total of 550 hp. Performance is stated at "less than 4.0 seconds" for 0-62 mph.
Old Jan 12, 2015 | 02:25 PM
  #163  
Rochester's Avatar
Rochester
Administrator
15 Year Member
Loved
Community Favorite
Top Answer: 1
iTrader: (9)
 
Joined: Nov 2010
Posts: 19,859
Likes: 5,149
From: Rochester, NY
Originally Posted by Herostar
Looks great! I'm excited about the turbos, MT says they expect it to be about 375 hp.
That makes much more sense.

F-Type S territory.
Old Jan 12, 2015 | 02:52 PM
  #164  
indyn's Avatar
indyn
Registered User
 
Joined: Jul 2010
Posts: 263
Likes: 1
If its built in Tennessee, instead of Japan as done for the previous G line, prices will be reasonable as labour costs are higher in Japan and there will be no transportation costs via ship. This will also eliminate any other importing costs involved.

Hopefully they will maintain same level of quality.

Canadian customers can export from US without paying the extra duty.
Old Jan 12, 2015 | 02:54 PM
  #165  
eljoker's Avatar
eljoker
Thread Starter
Registered User
 
Joined: May 2010
Posts: 1,213
Likes: 192
I just hope its still build in Japan at this point. Everything else seems on point so far.



All times are GMT -4. The time now is 11:19 PM.