Official~Best offsets for running FAT tires!
The fronts will be your limitation, Could probably go 265 all around but even at +45 you'll be really close since the front fender edge isn't rolled flat like the rear lip. Should be OK except under hard compression.
could i get some fitment advice please?
my current setup is
F: 19x9 +47 255/40/19
R: 19x10 +30 285/35/19
i have the opportunity i secure another set of the rears (with square setup in mind). essentially, im asking if running 19x10 +30 in the front would cause any serious rubbing issues. my goal is to run 19x10 +30 255/40/19 all around.
the reason, i ask is because i rub in the back a bit when there are 3+ people in the car. most of the bumper tab has been shaven off as well. then again, it may be because im running 285s
i'm only dropped, on coils, a tad bit lower than eibachs (for reference i believe somewhere around -1.4front -1r).
my current setup is
F: 19x9 +47 255/40/19
R: 19x10 +30 285/35/19
i have the opportunity i secure another set of the rears (with square setup in mind). essentially, im asking if running 19x10 +30 in the front would cause any serious rubbing issues. my goal is to run 19x10 +30 255/40/19 all around.
the reason, i ask is because i rub in the back a bit when there are 3+ people in the car. most of the bumper tab has been shaven off as well. then again, it may be because im running 285s
i'm only dropped, on coils, a tad bit lower than eibachs (for reference i believe somewhere around -1.4front -1r).
could i get some fitment advice please?
my current setup is
F: 19x9 +47 255/40/19
R: 19x10 +30 285/35/19
i have the opportunity i secure another set of the rears (with square setup in mind). essentially, im asking if running 19x10 +30 in the front would cause any serious rubbing issues. my goal is to run 19x10 +30 255/40/19 all around.
the reason, i ask is because i rub in the back a bit when there are 3+ people in the car. most of the bumper tab has been shaven off as well. then again, it may be because im running 285s i'm only dropped, on coils, a tad bit lower than eibachs (for reference i believe somewhere around -1.4front -1r).
my current setup is
F: 19x9 +47 255/40/19
R: 19x10 +30 285/35/19
i have the opportunity i secure another set of the rears (with square setup in mind). essentially, im asking if running 19x10 +30 in the front would cause any serious rubbing issues. my goal is to run 19x10 +30 255/40/19 all around.
the reason, i ask is because i rub in the back a bit when there are 3+ people in the car. most of the bumper tab has been shaven off as well. then again, it may be because im running 285s
i'm only dropped, on coils, a tad bit lower than eibachs (for reference i believe somewhere around -1.4front -1r).
thanks, exactly what i calculated
my front setup is really tucked in. i have a 10mil spacer and think i could make do at a maximum of 20mm let alone extending it an extra 29.7mm.
i was just hoping that someone could say 'no, jujubii! i run that setup perfectly fine' haha
my front setup is really tucked in. i have a 10mil spacer and think i could make do at a maximum of 20mm let alone extending it an extra 29.7mm.
i was just hoping that someone could say 'no, jujubii! i run that setup perfectly fine' haha
Registered User
Joined: Jul 2012
Posts: 288
Likes: 13
20x9 in front 245s 15mm spacer to clear bbks
20x10.5 in rear with 285s
hankook v12 tires
lowere with tein h techs "mild drop" perfect for daily driving
plenty of space in the rear i was actually going to a 305 set up maybe
20x10.5 in rear with 285s
hankook v12 tires
lowere with tein h techs "mild drop" perfect for daily driving
plenty of space in the rear i was actually going to a 305 set up maybe
Thread Starter
Registered Member
iTrader: (1)
Joined: Oct 2006
Posts: 1,489
Likes: 126
From: Houston, Tx
Look great! 305 would give it a nice aggressive look! Might want to consider a 255 or maybe a 265 on the front to offset the 305. Don't want skinnies and fatties. 
LOL
LOL
