Official~Best offsets for running FAT tires!
hey guys got some coupe g37 wheels for my sedan. im thinking of upgrading the rear tires. ill be moving the 245's to the front.
and thinking about getting 285 for the rear. will i get alot more understeer?
and thinking about getting 285 for the rear. will i get alot more understeer?
Thread Starter
Registered Member
iTrader: (1)
Joined: Oct 2006
Posts: 1,489
Likes: 126
From: Houston, Tx
What is everyone's thoughts on the new WORK Gnosis CV201? I'm digging them and PMed RavSpec for pricing. Need help picking perfect offsets. I'm still leaning towards Dagon68 set-up except a 285/35 vs his 295/30;
19x9.5 +32 255/40
19x10.5 +45 285/35
19x9.5 +32 255/40
19x10.5 +45 285/35
My 20X10 +45s are just about perfectly tucked just inside the fender lip w/ my 295/30/20s, so your 285s on a 19" +45 should be pretty similar.
Rob, are you planning on running close to OEM camber?
Remember, i'm on Swift now, too. My front 18x9.5+38 extends beyond the fender lines by a few mm. The 255/45 tires make it less apparent due to the slight stretch. This is with camber on the lower-end of OEM spec.
Remember, i'm on Swift now, too. My front 18x9.5+38 extends beyond the fender lines by a few mm. The 255/45 tires make it less apparent due to the slight stretch. This is with camber on the lower-end of OEM spec.
Thread Starter
Registered Member
iTrader: (1)
Joined: Oct 2006
Posts: 1,489
Likes: 126
From: Houston, Tx
Yes I want to keep it OEM/square as possible. You suggesting to take it back some? You have a pic of your fronts?
Any chance you'll be back home anytime soon? It's best viewed in person. It's extending just slightly, but not very noticeable since the tire is a bit stretched. Depending on the angle you're viewing it, it's either OK, or poking a little.
Thread Starter
Registered Member
iTrader: (1)
Joined: Oct 2006
Posts: 1,489
Likes: 126
From: Houston, Tx
Won't be home till May. Maybe I'll request a +35-40 and add small spacers. What I had to do with my old WORKs for my Z.