Official~Best offsets for running FAT tires!
Jun 29, 2012 | 12:27 PM
Joined: Nov 2011
Posts: 1,856
Likes: 87
From: Madison, WI
Here are a some pics from another thread I started a couple months ago
WedsSport SA-55M
19x9 +38 with 15mm spacer, 19x10 +40
245/40/19
285/35/19
Jun 29, 2012 | 12:57 PM
Joined: Oct 2009
Posts: 8,659
Likes: 211
From: St Paul, MN
Quote:
Originally Posted by
Robert_K
So those are a 20x9.0 +38 & 20x10.5 +45?
That's correct
Jun 29, 2012 | 01:23 PM
Thread Starter
Joined: Oct 2006
Posts: 1,489
Likes: 126
From: Houston, Tx
Quote:
Originally Posted by
Alpha Ice
2011 G37S
20x9.0 +38 255.35.20 -2.1
20x10.5 +45 285.30.20 -2.0
Dropped on SS-P with EDFC, front is as low as I can go. I have a 5mm spacer I'm still needing to install up front. No rubbing at all
Looks good! The front does need to come out. As I've mentioned I'm leaning towards a 20x10.5 +40 but the +45 with the 285 doesn't look bad.
Jun 29, 2012 | 03:16 PM
Joined: May 2007
Posts: 956
Likes: 9
From: San Diego, CA
GREAT Thread!
Quote:
Originally Posted by
SwissCheeseHead
Here are a some pics from another thread I started a couple months ago
WedsSport SA-55M
19x9 +38 with 15mm spacer, 19x10 +40
245/40/19
285/35/19
The way you ride is raked, it looks like a panther waiting to pounce or something. So sick!
Jun 29, 2012 | 03:21 PM
Joined: Nov 2011
Posts: 47
Likes: 0
Much needed thread...
Im looking at getting MRR - GT8 Wheels 19x9.5 +38 all around (G37 Sedan), question is will 245/40/19 give me a flush fit? (what size spacers required if any?)
Stock Suspension, no camber.
Thanks and great thread once again.
Jun 30, 2012 | 08:25 AM
Joined: Nov 2011
Posts: 1,856
Likes: 87
From: Madison, WI
Jun 30, 2012 | 02:57 PM
Joined: Oct 2011
Posts: 312
Likes: 12
2009 G37x
Forgestar F14s
Dropped on Eibach springs with SPC camber kits in front and rear.
Front:
20x9 +32
245/35R20
Camber -0.3 degrees
Rear:
20x10.5 +40
285/30R20
Camber ~-1.9
Jun 30, 2012 | 09:59 PM
Thread Starter
Joined: Oct 2006
Posts: 1,489
Likes: 126
From: Houston, Tx
Jul 1, 2012 | 09:27 AM
Joined: Aug 2008
Posts: 1,193
Likes: 36
245/35/20
8.5 +24
285/30/20
10.5 +45
I know you said 3 pics, but here's another shot with the original rears at +35. Could've fit with more camber.
Jul 1, 2012 | 09:42 AM
Thread Starter
Joined: Oct 2006
Posts: 1,489
Likes: 126
From: Houston, Tx
Look real good Mike! Suspension changes?
Jul 1, 2012 | 12:44 PM
Joined: Aug 2008
Posts: 1,193
Likes: 36
Thanks.
It's on BC Coils, dropped about the same as Eibach's.
In those pics, camber is approx. -1.9 up front and -2.3 in the rear, give or take a second here and there.
Currently on 18x9.5+38 w/ 255/45s and in-spec camber. It's fairly flush IMHO, i can't even fit 265/40s on there without risking tire/fender rub.
Jul 1, 2012 | 11:09 PM
Joined: Nov 2009
Posts: 764
Likes: 22
From: Houston, TX
Quote:
Originally Posted by
SwissCheeseHead
Here are a some pics from another thread I started a couple months ago
WedsSport SA-55M
19x9 +38 with 15mm spacer, 19x10 +40
245/40/19
285/35/19
Sweet! Now I know what a 285/35 will look on the back.
Jul 1, 2012 | 11:41 PM
Thread Starter
Joined: Oct 2006
Posts: 1,489
Likes: 126
From: Houston, Tx
Quote:
Originally Posted by
WARAT
Sweet! Now I know what a 285/35 will look on the back.
And it look MEAN!
Jul 2, 2012 | 12:00 AM
Joined: Nov 2009
Posts: 764
Likes: 22
From: Houston, TX
Quote:
Originally Posted by
Robert_K
And it look MEAN!
+1
I should be joining this thread soon. Well.. with a 275 for now at least..
Jul 2, 2012 | 01:49 AM
Thread Starter
Joined: Oct 2006
Posts: 1,489
Likes: 126
From: Houston, Tx
Quote:
Originally Posted by
WARAT
+1
I should be joining this thread soon. Well.. with a 275 for now at least..
Was hoping to place my order for the HREs in August but buying a house. So it is being pushed back. However I'm sold on a 255/35 & 285/30 set-up for my sedan.