Need help!! Diy turn as tail diode dynamics

Reply Subscribe

Thread Tools

Search this Thread

Aug 15, 2015 | 11:22 AM

#61

cmackin

Registered User

Joined: Jun 2014

Posts: 53

Likes: 4

From: MN

I also have the hyperblinking issue with brake depressed. If anyone has any ideas please let me know. It worked normally for a while, but after a month or so the passenger side hyperblinks with brake.

Aug 15, 2015 | 01:46 PM

#62

jman09

Registered User

Joined: Feb 2015

Posts: 146

Likes: 16

From: chi-town

Quote:

Originally Posted by cmackin

i'd check your connections for the passenger side. if that looks good, i'd look at replacing the resistor on that side as the next step.

Aug 15, 2015 | 03:26 PM

#63

JC-RH

Registered Member

iTrader: (6)

Joined: Dec 2005

Posts: 362

Likes: 25

From: Miami, FL

Quote:

Originally Posted by JC-RH

I installed it exactly like this on my 2011 sedan. Same color wiring. Tried the hazards and turn signals, and everything worked great. When I started driving, I noticed that I would get hyper blinking if I had the turn signal AND the brake pressed. As soon as I would release the brake, the regular speed blinking came back. Happens on both sides. Any suggestions???

Maybe I didn't squeeze the red splice things hard enough. I'll post a pic later of my wiring. Both sides work are acting exactly the same.

Aug 15, 2015 | 09:18 PM

#64

JC-RH

Registered Member

iTrader: (6)

Joined: Dec 2005

Posts: 362

Likes: 25

From: Miami, FL

Bumppppp

Last edited by JC-RH; Aug 15, 2015 at 11:02 PM.

Aug 17, 2015 | 02:27 PM

#65

JC-RH

Registered Member

iTrader: (6)

Joined: Dec 2005

Posts: 362

Likes: 25

From: Miami, FL

I fixed it earlier today. I had done everything correct except for one of the resistor ends. I had tapped it into the green with yellow stripe wire (brake) instead of the solid green (turn) wire. I switched it over, and it works awesome now.

Thanks Diode!

Aug 18, 2015 | 12:38 PM

#66

2GoRNot2G

Premier Member

iTrader: (5)

Joined: Dec 2008

Posts: 2,382

Likes: 415

From: SoCal

I just received my module from Diode Dynamics yesterday. I will try to get it installed this weekend and post up some pics next week.

Nov 2, 2015 | 08:25 AM

#67

PGg35s

Registered User

Joined: Nov 2015

Posts: 115

Likes: 13

From: Indianapolis

Is the plug and play version for the sedan ready?

Nov 2, 2015 | 09:27 AM

#68

Diode Dynamics

Former Sponsor

iTrader: (11)

Joined: Jul 2011

Posts: 2,106

Likes: 142

From: St. Louis, Missouri

Quote:

Originally Posted by PGg35s

Is the plug and play version for the sedan ready?

We are still waiting on the factory connectors to arrive

A thread will be posted when they are available

Thank you,
Nick C.

Dec 13, 2015 | 04:23 PM

#69

mrig37

Registered User

Joined: Nov 2015

Posts: 149

Likes: 12

@nick from diode I just placed an order yesterday for my DIY for 2013 g37 sedan. But didn't add the resistors because I didn't read abut the hyper blink till after. Is they're anyway I can either add them on or just cancel my order and really do it

Dec 13, 2015 | 09:20 PM

#70

Arrogant

Registered User

Joined: Aug 2014

Posts: 173

Likes: 13

I just placed an order for mine too. I figured I might as well do this because I am going to be removing the back bumper to replace the bracket that holds the license plate led's since it rusted to ****. I have a lot of work to do this week.

Dec 13, 2015 | 10:58 PM

#71

RxRyanM

Registered Member

Joined: Jul 2013

Posts: 219

Likes: 43

From: Lex, KY

Quote:

Originally Posted by mrig37

DD shipping is pretty darn fast, so you should probably call in the morning to make sure they can combine them so you don't have to place another order/get hit with another shipping charge.

Quote:

Originally Posted by Arrogant

......the only thing this requires is unhooking the carpet in the trunk and peeling it back. No bumper removal needed.