Well duh!! LOL

We are just waiting on factory connectors to arrive

Nick C.

 

Can't wait.

 

Nick,

I watched the video. It looks pretty straightforward, so I'm wondering what the difference would be compared to the future plug and play version? Also, what price will the new ones go for?

Could you please PM me a quote for the current DIY kit with resistors to 33177? I think someone here mentioned free shipping too. Thanks.

 

The Sedan version uses a different connector than the coupe, that's pretty much the only difference.

Shipping is free for U.S. members if you send a PM for the code

Thanks!
Nick C.

 

My DIY kit just came in a couple days ago, I'll have it installed next weekend and report back how easy it was. I'm thinking it will take <30 mins.

 

I bought them the same day DD sent out the email blast. Took me less than 5 minutes to install each side. A subtle mod but very effective. Plug and play.

 

Nice!!

Looking good @PongSanity!

Nick C.

 

Ordered the DD tail as turn on Monday and got it today. Thanks Nick!



I ended up installing them directly to the taillights. Here are some pictures of the wires cut and the resistor to stop hyperblink.

 

Looks so much better! I ordered mine earlier today. I was reading a thread from January where they were waiting for the connectors to offer a plug and play kit. That's the same story now so I didn't want to wait any longer.

It's a bit hard to see which wires go where in those pics. Can you help clarify what to cut and connect? Also what resister did you use? Link?

 

^ I cut the solid green and the green/yellow wire. The resistor goes on the turn signal power (solid green) and ground (black) wire.

I had some extra resistors from when I bought some new switchbacks that I used, if I didn't have them I would've just ordered them from Nick.

 

This is what I see on their site

LED Resistors - Accessories - All Products

Any idea which I should order?

 

Ok so I found this on ebay.

http://www.ebay.com/itm/2PK-50W-6RJ-Load-Resistor-Fix-LED-for-Bulb-Fast-Hyper-Flash-Turn-Signal-Blink/251587652308?_trksid=p2050601.c100085.m2372&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20140211132617%26meid%3D33f3966dbb1841f49b4f359a26a58e1f%26pid%3D100085%26rk%3D2%26rkt%3D4%26sd%3D321469249106%26clkid%3D7613361429079646482&_qi=RTM2067268
I already ordered this kit.

Tail as Turn? Module, DIY - Tail as Turn Modules - All Products

So it should be as simple as cutting and crimping now

 

Got all the parts in today and completed the install.

I followed this guide to remove the tail lights.

https://www.myg37.com/forums/d-i-y-i...iler-pics.html

I then followed tonyHTX's instructions above. Keep in mind I have the exact model as tonyHTX 2008 G35S sedan. So the wiring colors may differ in later models.

 

^ Awesome, glad I could help! It's really quite easy and well worth the $20 imo.

 

[QUOTE=tonyHTX;3930583]Ordered the DD tail as turn on Monday and got it today. Thanks Nick!



I ended up installing them directly to the taillights. Here are some pictures of the wires cut and the resistor to stop hyperblink.



[/QUOTE
I have a G sedan is this how I would hook it up.