A Day at JWT
I hear that most bypass valves only lose about 2 or 3 hp though.
The other downside is that I think you have to cut into the tube to install it. Injen should build one ready built w/ bypass valve.
Last edited by KAHBOOM; May 28, 2008 at 04:55 PM.
Registered User
Joined: May 2008
Posts: 27
Likes: 0
I guess it depends on how much poer you lose. If injen produces the claimed 145 hp and the bypass valve only saps 5 hp, you still have quite a bit of net gain over a short ram which produces maybe 1 or 2 hp if that.
I hear that most bypass valves only lose about 2 or 3 hp though.
The other downside is that I thinkn you have to cut into the tube to install it. Injen should build one ready built w/ bypass valve.
I hear that most bypass valves only lose about 2 or 3 hp though.
The other downside is that I thinkn you have to cut into the tube to install it. Injen should build one ready built w/ bypass valve.
![]\[ /-\ ]\/['s Avatar](data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 50 50'><circle class='avatar-circle-default' fill='%23de8a71' cx='25px' cy='25px' r='20px'></circle><text class='avatar-text-default' x='49%' y='53%' fill='white' text-anchor='middle' alignment-baseline='middle'>]</text></svg>)
Joined: Oct 2007
Posts: 2,335
Likes: 1
From: Metro Detroit, MI [Sterling Hts.]
Hydro-Shields: Durable polyester uniform micron openings with an embedded hydrophobic water repellent process
http://injen.com/docs/products/listing.asp?pcc=ac
Check it out. The Injen is pretty sweeta and to be honest i dont mind just not driving in rain or driving carefully in it and avoiding puddles as long as I have the hydro-shield...
Question: If installing the Injen requires bumper removal - does that mean that changing/cleaning toe cone filters will also require bumper removal????? or is it just the installation?
Thread
Thread Starter
Forum
Replies
Last Post
