Hydraulic lines from rack to pump HELP!

Reply Subscribe

Thread Tools

Search this Thread

Feb 11, 2023 | 03:37 PM

L1TWITMYG37

Thread Starter

Registered Member

Joined: Sep 2019

Posts: 15

Likes: 0

From: Hot Springs, Arkansas

Hydraulic lines from rack to pump HELP!

So I have finally completed my motor swap and have everything all hooked up ready to rock and roll. Except for these lines to coming from the rack and pinion to the power steering pump. My issue is I took these off before I even started the motor swap bc my rack and pinion was leaking but I was sure in for it when my motor seized up on me at that point I left the rack and pinion off for so long that I forgot how to route the lines with the little clips and what clips go where and all that good stuff. If anyone could help me with some pictures or a diagram I have searched the service manual and the internet until I have gone blue in the face. I had taken pictures but my phone was run over and broken into a million pieces unfortunately they weren't saved to my Google photos because I can't find them anywhere. All I need is something to show me which clips connect at what point to route these.