IPL/Aerodynamic Bumper Swap Idea.
Thread Starter
Premier Member
iTrader: (13)
Joined: Dec 2010
Posts: 4,960
Likes: 34
From: San Antonio, TX
I saw someone like 2 weeks ago with just holes in the place where the fog lights go, no bueno. Either buy fogs or order the 2010 anniversary edition bumper instead, which comes with no holes.
Registered User
Joined: Jun 2012
Posts: 44
Likes: 1
From: Orange County, CA
I bought two different sets of the TYC fogs from Amazon and Rockauto. For both sets, the glue or black sealant around the glass is really messy and spotty. Did anyone else notice this also and does it matter?
Registered User
Joined: Jun 2012
Posts: 44
Likes: 1
From: Orange County, CA
Registered User
Joined: Jul 2012
Posts: 288
Likes: 13
i installed mine last weekend, new ipl bumper and skirts, i ended up not going with the fog lights and using my factory ones in the headlight assembly,
i ended getting screen wire mesh from home depot they use on gutter, cutting the pattern out and painting it black, i also was able to use all the factory screws
it looks 100% oem and with out the extra cost of additional fog lights and washer tanks
total cost 10.00
ill post pics
http://www.facebook.com/#!/photo.php...type=1&theater
http://www.facebook.com/#!/photo.php...type=1&theater
only thing i need to do now is paint the stock washer resavoir in black but you really dont see it unless your at a a certain angle
i ended getting screen wire mesh from home depot they use on gutter, cutting the pattern out and painting it black, i also was able to use all the factory screws
it looks 100% oem and with out the extra cost of additional fog lights and washer tanks
total cost 10.00
ill post pics
http://www.facebook.com/#!/photo.php...type=1&theater
http://www.facebook.com/#!/photo.php...type=1&theater
only thing i need to do now is paint the stock washer resavoir in black but you really dont see it unless your at a a certain angle
i installed mine last weekend, new ipl bumper and skirts, i ended up not going with the fog lights and using my factory ones in the headlight assembly,
i ended getting screen wire mesh from home depot they use on gutter, cutting the pattern out and painting it black, i also was able to use all the factory screws
it looks 100% oem and with out the extra cost of additional fog lights and washer tanks
total cost 10.00
ill post pics
http://www.facebook.com/#!/photo.php...type=1&theater
http://www.facebook.com/#!/photo.php...type=1&theater
only thing i need to do now is paint the stock washer resavoir in black but you really dont see it unless your at a a certain angle
i ended getting screen wire mesh from home depot they use on gutter, cutting the pattern out and painting it black, i also was able to use all the factory screws
it looks 100% oem and with out the extra cost of additional fog lights and washer tanks
total cost 10.00
ill post pics
http://www.facebook.com/#!/photo.php...type=1&theater
http://www.facebook.com/#!/photo.php...type=1&theater
only thing i need to do now is paint the stock washer resavoir in black but you really dont see it unless your at a a certain angle
Registered Member
Joined: Sep 2009
Posts: 548
Likes: 1
From: NorthEast Jersey
My bodyshop said they can get me the aero bumper for $ 394.74 unpainted from I nfiniti Directly. The part# is K60201NL0C. I called infiniti dealers/websites and I get the run around that, is incorrect. That part is just a plain sport or journey bumper, even one dealer told me its a LIP accesory, like what the hec? Can someone clarify this?
