Anyone know what screws I should pick up for clamping up my fogs to my new aero?

 

its a 10mm screw, you can go to the dealer and get all 4 from them.

 

M10 X 20 Shouldered.

Home Depot, buy the SS, not zinc.

 

https://www.myg37.com/forums/body-in...-interest.html

 

I might do this, just went to Home Depot and they didn't have the SS that TVpost recommended.

 

You can get those anywhere not just dealer. Remember these screws will be hiding very minor chance for rusting. Let's not make a big deal about 4 screws lol

 

Does anybody have any part numbers for the IPL no fog inserts from the 2010 Aero bumper?

 

nope, but on ebay a couple of the aero bumpers are listed ask the seller to get the part number for you!

 

I'm looking to do the full IPL swap with all the grills, fogs etc.

 

so i'm about ready to get the LP Aero "IPL" bumper, but just want to double check, can i put this on my 08 non sport coupe without getting the washer reservoir? I do want to add in fogs as well, will this be an issue?

 

if you want the lower fogs, you will need the new washer reservoir!

 

Yes, you will need the slim bottle.

PS, I have a fog loom in the classifieds!!

 

haha this is great...this thread lives on ..IPL switch FTW

 

what do you mean by "lower fogs"? in comparison to the standard fogs in the headlights on non "s" models?


and if you'd be kind enough to tell me what a fog loom is i'd appreciate that as well, and do i NEED this to complete the project? lol

 

You stated you wanted to add fogs, the IPL bumper has holes in the lower bumper to add fogs.


A loom is a bundle of wires.

See my fog DIY sticky in the DIY section.