Just bought Lexani R-SIX 20 inch black label rims. My car is sitting on stock suspension and I have the stock 19 inch rims. My car is a 2010 G37 sport coupe. The rims I ordered are

Front:
20" x 8.5", +15 to +42 Offsets, 5x112-120 Bolt Patterns, 74.1-108mm Hubs

Rear:
20" x 10", +15 to +42 Offsets, 5x112-120 Bolt Patterns, 74.1-108mm Hubs


My tires sizes are as follows:

Front:
255/35ZR20

Rear:
285/30ZR20


Now when I get these wheels will I have to get my car lowered or is it going to look good as is. And the offset has a range, so will they pick an offset for me or do I have to do it?

 

Its better you pick the offsets as the company will probably make a poor choice on offsets.

 

How do I pick the offsets if the tires are already ordered and being shipped now?

 

I don't understand, you ordered a range of wheels?

Front:
20" x 8.5", +15 to +42 Offsets, 5x112-120 Bolt Patterns, 74.1-108mm Hubs

Rear:
20" x 10", +15 to +42 Offsets, 5x112-120 Bolt Patterns, 74.1-108mm Hubs

 

No, I only ordered 1 set of rims and tires, but they never asked me what the offset was, but they guarantee that these rims will fit the car. I ordered from CarID.com but now I'm really confused.

 

Lexani makes all their wheels in blanks. They drill the bolt pattern to order and machine the mounting pad to create the offsets. That is why there is a range stated for both numbers because that is what they can make

 

So they will pick the offsets for me?