Looks dope!!!

Do you guys think I can fit a 20x10 with a +45 offset in the front with a 255 tire? Is it going to rub against the fender with a mild drop?

 

depends on the drop
you on coils or springs ?

 

Hey guys, new to the forum here I own a 2012 G37 Coupe... I have a set of Avant Garde wheels specs are:

19x9.5 +15 (front)
19x11 + 18 (rear)

I will be on HSD Coilovers soon and have front and rear camber arms, im just wondering how i can run this setup without too much camber to stay away from uneven tire wear, i know i will have some regardless as these are very aggressive offsets. just need to hear some G owners opinions lol. Need to know what tire size to run and what alignment specs also.

Here are a few pics of the wheels on the car without tire.

Thanks guys!






This is the rear wheel poke



This is the front wheel poke

 

you're probably gunna need some pretty decent rubber bands if you want minimal camber
I'd expect about -2 to about -2.5 in the rear...could probably run a 265/35 without rubbing

 

Thank you Venom, when you say "decent rubber bands" are you talking about money to spend lol I want to stay away from any body work. I don't mind running a stretch tire and will not be slammed will ride on a moderate height to avoid any scrapping/rubbing.

 

I will be getting coilovers so I can adjust the height accordingly if this set up fits

 

rubber bands as in low pro tires
245/35 and 265/35 would probably work

 

Thank you buddy, will post pics when i get tires. Can't wait to see how this looks!

 

Can anyone tell me if 19x10.5 +22 squared on g37x sedan will fit with 245/40 tires at 26 inch fender to ground height and be able to run about -3.5 degrees of camber in rear without pulling the fenders? Also thinking about possibly stretching a 235 but idk, seems too much/unsafe?

 

youll be fine but in the front you wil run camber forsure
I had 245/35 in my rears on 10.5 +12 with -6 was pretty low though as well, dint pull no fender in the rear
I woldent go with 235, tire can pop out
and for the front you might need some fender work if you don't camber, you will rub

 

Yo B drizzy - Is that a reply to my post or you're getting back to VQCrew?

G37 sedan with 20x10 with +45 offset wrapped around in a 255 or even 245/35? Will it rub? will it clear steering knuckle without the spacers. I do not want to run camber in the front.

 

that was reply for VQ crew, sorry




and for 2011-G, it depends on how low you go
Try a 235/35
I suggest with hankook since they run true
other tires might sit high and you can run into rubbing
even if you don't run camber arms with a drop you will still get natural camber
Just make sure to alight it after wheels go on, Shouldn't be much since you will be on 20"

 

For the front, will -3 camber be enough? because I have stock control arms and that's the natural camber I had from lowering it. Also, how much do you think I would have to pull the rear fenders to run about -3.5 degrees?

 

Theres not much pulling for us, its pretty much going to flare
But it would be a little hard to tell since I cant see in person how it will turn out once its installed

 

b-drizzy - When you ran 10.5's +22 on your rear with 255's, did you ever come in contact with the fender? Did you just have the fender liner trimmed?