Official Low Offset/Hellaflush Thread
stevo check my build thread I'm running same offset +22 but mine are 19x9.5 and 19x10.5 https://www.myg37.com/forums/build-t...ld-thread.html
If you have any question ask away!
If you have any question ask away!
Kuro,
What size tires are you running in those pictures?
How much camber do you have to run to make those offsets fit? Do you buy tires a lot? lol.
I tried the GT-Cs on and the front was rubbing the caliper, looks like i need a 5mm spacer so my offset is going to be around +17 (YIKES).
Idk if its going to work, I cannot afford to buy tires every 10k miles.
Taking the plunge regardless. I can always resell stuff.
Thanks for the help.
Its been years since I had a nice enough car to modify so I don't want to screw up this beautiful G!
What size tires are you running in those pictures?
How much camber do you have to run to make those offsets fit? Do you buy tires a lot? lol.
I tried the GT-Cs on and the front was rubbing the caliper, looks like i need a 5mm spacer so my offset is going to be around +17 (YIKES).
Idk if its going to work, I cannot afford to buy tires every 10k miles.
Taking the plunge regardless. I can always resell stuff.
Thanks for the help.
Its been years since I had a nice enough car to modify so I don't want to screw up this beautiful G!
Kuro,
What size tires are you running in those pictures?
How much camber do you have to run to make those offsets fit? Do you buy tires a lot? lol.
I tried the GT-Cs on and the front was rubbing the caliper, looks like i need a 5mm spacer so my offset is going to be around +17 (YIKES).
Idk if its going to work, I cannot afford to buy tires every 10k miles.
Taking the plunge regardless. I can always resell stuff.
Thanks for the help.
Its been years since I had a nice enough car to modify so I don't want to screw up this beautiful G!
What size tires are you running in those pictures?
How much camber do you have to run to make those offsets fit? Do you buy tires a lot? lol.
I tried the GT-Cs on and the front was rubbing the caliper, looks like i need a 5mm spacer so my offset is going to be around +17 (YIKES).
Idk if its going to work, I cannot afford to buy tires every 10k miles.
Taking the plunge regardless. I can always resell stuff.
Thanks for the help.
Its been years since I had a nice enough car to modify so I don't want to screw up this beautiful G!
Bill was running 255/40/19 and 275/35/19 if I remember correctly
https://www.myg37.com/forums/picture...jdmphasis.html
Lou was running 245/40/19 and 275/35/19
https://www.myg37.com/forums/wheel-a...the-g37-2.html
Hey, had a question or two... My G37s is currently lowered with what I believe to be H&R springs on the stocker 19s. I recently picked up some old school 19" Work Eurolines that I am going to restore, they have a little poke on the front and too much gap all the way around SO, I am looking at Stance coilovers... and Maybe the SPC camber kits too?? Here comes to my Question, What are the benefits (or need) for the Camber kits consisting of Front upper control arms and Rear lower bars on our cars when moderately slammed on coilovers???

Incurve IC-S10 on stock height
my buddy just got IC-S10s 20x9 +20, 20x10.5 +25. i was just wondering what kind of tires would look nice on them hes sitting at stock height. I've tried searching but we haven't found anything. Thanks in advance
can anyone tell me the offset of these wheels? I know they are 20x9.5 squared but the offset?? I want to run the same setup with 245/40 tires.
This thing is golden! Infinity G37X Sedan on 20" D2FORGED FMS-01
This thing is golden! Infinity G37X Sedan on 20" D2FORGED FMS-01
can anyone tell me the offset of these wheels? I know they are 20x9.5 squared but the offset?? I want to run the same setup with 245/40 tires.
This thing is golden! Infinity G37X Sedan on 20" D2FORGED FMS-01
This thing is golden! Infinity G37X Sedan on 20" D2FORGED FMS-01
Contact Information: 800 913 3513 | info@d2forged.com | one@d2forged.com
Yeah Iam lol 9.2 +12 225/35/19 front
and 10.5 +22 Rear 255/35/19 got nice little stretch
Slammed on Stance SS coils and SPC camber arms
photo11_zpsde1300b3.jpg?t=1424627578


and 10.5 +22 Rear 255/35/19 got nice little stretch
Slammed on Stance SS coils and SPC camber arms
photo11_zpsde1300b3.jpg?t=1424627578


Hello,
This is my first post on the forum. I'll be getting a set of rims for my 2011 G37x coupe shortly and want to know about the offset settings that work for the car. The rims are Braelin BR05 19x9.5 and the tires are 245/40/19 (thinking about getting continental extremecontact).
Since these rims are concave I was hoping to get the lowest offset possible to maximize the appearance of concavity (my understanding of this concept could be incorrect). I do not want any rubbing and don't want a complicated install. Any advice? The rims come in +25, +35 and +45. Also bore size can be selected (66, 67.1, 70.5, 71.5).
Which offset and bore size should I choose? (I used the search function but did not find an answer)
This is my first post on the forum. I'll be getting a set of rims for my 2011 G37x coupe shortly and want to know about the offset settings that work for the car. The rims are Braelin BR05 19x9.5 and the tires are 245/40/19 (thinking about getting continental extremecontact).
Since these rims are concave I was hoping to get the lowest offset possible to maximize the appearance of concavity (my understanding of this concept could be incorrect). I do not want any rubbing and don't want a complicated install. Any advice? The rims come in +25, +35 and +45. Also bore size can be selected (66, 67.1, 70.5, 71.5).
Which offset and bore size should I choose? (I used the search function but did not find an answer)
HELP PLEASE!!!
I am looking to buy a new set of wheels for my new g37s coupe. Its completely stock but I will be lowering on coils & adding a bit of camber.
The set I am looking at is a 20" staggered set available in
FRONT - 20x9.5 et 12 & 20
REAR - 20x11 et 15 & 25
My question is would these wheels clear the BBK? If so would they be poking too far out of the fender?
I understand this is quite an aggressive setup, but I really like the super flush(thatcarlooksdangerous) look.

I am looking to buy a new set of wheels for my new g37s coupe. Its completely stock but I will be lowering on coils & adding a bit of camber.
The set I am looking at is a 20" staggered set available in
FRONT - 20x9.5 et 12 & 20
REAR - 20x11 et 15 & 25
My question is would these wheels clear the BBK? If so would they be poking too far out of the fender?
I understand this is quite an aggressive setup, but I really like the super flush(thatcarlooksdangerous) look.


