When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Damn mansu holding it down for the sedans, and lam I love the way your cars sittin, especially now that the rear is lower. Too bad nobody is into this scene cause this thread is always dead. on driver its blowing up all the time
I'm a little surprise it's not more popular here as well. I know on the Z forum it's crazy big with a 2mill view + thread.
need some advice from the experts. I currently have 19 inch 9.5/10.5 +12 offset wheels with 235/35 and 255/35 tires on my 350z. Will these be too aggressive on a g37? I asked some people and they said thats crazy aggressive and won't fit right, but i know the stretched crowd might have different opinions. Its not very aggressive on a 350z as I needed to use 15mm spacers front and rear, fenders rolled and slightly pulled in the rear tho. How about on a g37 coupe? Thanks
one question, if im running 10.5 with 10 in the back 245/35/20 i dont have to pull or roll my fender to not rub right? just need to put neg camberr ight?
one question, if im running 10.5 with 10 in the back 245/35/20 i dont have to pull or roll my fender to not rub right? just need to put neg camberr ight?
I ran those exact specs but with a 235 tire and i was at about -5.2 camber all around. no rubs