FS Stillen Oil Cooler Kit
#1
Stillen Oil Cooler Kit
Category: Engine - Power Adders
Price: $280
Private or Vendor Listing: Private Listing
Part fits: 2008-2009 G37 Coupe
Location (State/Prov): OH
Item Condition: Used
Stillen Oil Cooler Kit - $280 shipped anywhere in the 48
It includes Setrab Oil Cooler, Mounting Bracket, Braided Stainless Steel Hoses, Fittings, Thermostatic Switch Plate, Oil Filter Adapter Nut, and hardware to remount the power steering cooler.
****You will need an oil filter. The number is listed on stillens website in the installation instructions.*****
<O></O>
<O></O>
I am located in West Chester, OH (45044). All parts are available for local pick up. I will ship any part at the buyer’s expense. Everything is OBO, but don't waste my time with unreasonable offers. Highest bidder gets the part in the case of high demand. Local buyers have priority. I don't have weights for each part, but do your best to estimate your own shipping quote. Once we reach an agreement I'll confirm your quote.
Accepted payment: Paypal, Cash.
All parts came from a 2008 G37s 6mt coupe.
Installation is available for local buyers.
<O></O>
Contact:
Email: rossab at muohio dot edu
Text only: 513 two eight six 2116
PM: I will check these daily
<O></O>
<O></O>
Last edited by rossab; 04-27-2011 at 08:15 AM.
#3
I'm not 100% sure on which oil cooler it is. I bought it when they only offered 1. There are some clamps, screws, and hose missing.
You will need to relocate the power Steering cooler. I would recommend putting it on the opposite side of the front grill as the oil cooler. Still wants you to sandwich it between the oil cooler and radiator which means it only gets a small amount of pre-heated air. I think this is a major design flaw with the stillen set up.
To mount it on the opposite side youll need 5 ft of 1/4? rubber hose and some miscellaneous screws. I would be more specific but I haven't actually done it.
You will need to relocate the power Steering cooler. I would recommend putting it on the opposite side of the front grill as the oil cooler. Still wants you to sandwich it between the oil cooler and radiator which means it only gets a small amount of pre-heated air. I think this is a major design flaw with the stillen set up.
To mount it on the opposite side youll need 5 ft of 1/4? rubber hose and some miscellaneous screws. I would be more specific but I haven't actually done it.
#7
Monday bump. This is a great solution for someone who tracks the car or takes spirited runs in hot weather. I put this on my car in July of 2010 and it has less than 3000 miles on it.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
sharmelan
Engine, Drivetrain & Forced-Induction
17
09-14-2015 03:18 PM