NationalGClub National G Club - Operating for the DC/MD/VA G35's and Surrounding Areas

ECU Reflashes?

Old Jul 1, 2005 | 11:13 AM
  #1  
mbq62's Avatar
mbq62
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 2,022
Likes: 0
From: Fairfax, VA
ECU Reflashes?

Has anyone gotten their ECU reflashed? I wonder if it's worth it.
Reply
Old Jul 1, 2005 | 11:18 AM
  #2  
Pratik's Avatar
Pratik
Registered User
iTrader: (3)
 
Joined: May 2004
Posts: 3,825
Likes: 0
From: Washington, DC Area
Worth it after you get all your mods installed and you're finally done. It wouldnt make snese to get an ECU reflash and then add more mods to your car.
Reply
Old Jul 1, 2005 | 11:25 AM
  #3  
G35_coupe_6MT's Avatar
G35_coupe_6MT
Registered User
 
Joined: Dec 2004
Posts: 140
Likes: 0
From: Central Florida
by this ECU you mean the pushing pedal 5 times in 5 secs etc, or the one you have to have a shop do for you?
Reply
Old Jul 1, 2005 | 11:38 AM
  #4  
pdjafari's Avatar
pdjafari
Registered User
iTrader: (2)
 
Joined: Jul 2004
Posts: 3,808
Likes: 0
From: DC/VA/MD
With an ECU reset you typically get your rev limiter bumped up to around 7700(??) i think they may also be able to tune your A/F since breather mods can make u run lean (dangerous) at higher RPM. the initial cost is pretty pricey..anywhere from $300-650...but they give you a discount after the initial flash. just remember if the dealer ever finds out u remapped ur fuel/air or timing or reflashed ur ECU your big time SOL when your engine fails!!
Reply
Old Jul 1, 2005 | 12:07 PM
  #5  
mbq62's Avatar
mbq62
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 2,022
Likes: 0
From: Fairfax, VA
Originally Posted by G35_coupe_6MT
by this ECU you mean the pushing pedal 5 times in 5 secs etc, or the one you have to have a shop do for you?

The shop do it.
Reply
Old Jul 1, 2005 | 12:19 PM
  #6  
lowrider's Avatar
lowrider
Registered User
iTrader: (1)
 
Joined: Jun 2003
Posts: 91
Likes: 1
From: Tucson, Arizona
I've had mine reflashed. Crawford and TechnoSquare got together and jointly developed a flash that takes advantage of the Crawford bolt-ons. Plenum, cats, and headers.

I've got the "Crawford Flash" on my ECU. Worth it? Oh Ya! I definitely felt the extra urge, and I don't bump the rev limiter anymore. BTW, the rev limit was raised to 7100 RPM. I usually shift somewhere around 6800 or 6900 on aggressive acceleration, and the power is still coming on.

Techno-Square did leave stickers on the ECU, but neither the dealer nor a smog inspection station can tell with their diagnostic tools that it was modified, and you don't get a CEL. To tell it's been changed, you need to physically remove it and look at it.

It's something I would do again, in a heart beat.

Lou
Reply
Old Jul 1, 2005 | 12:56 PM
  #7  
mbq62's Avatar
mbq62
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 2,022
Likes: 0
From: Fairfax, VA
Originally Posted by lowrider
I've had mine reflashed. Crawford and TechnoSquare got together and jointly developed a flash that takes advantage of the Crawford bolt-ons. Plenum, cats, and headers.

I've got the "Crawford Flash" on my ECU. Worth it? Oh Ya! I definitely felt the extra urge, and I don't bump the rev limiter anymore. BTW, the rev limit was raised to 7100 RPM. I usually shift somewhere around 6800 or 6900 on aggressive acceleration, and the power is still coming on.

Techno-Square did leave stickers on the ECU, but neither the dealer nor a smog inspection station can tell with their diagnostic tools that it was modified, and you don't get a CEL. To tell it's been changed, you need to physically remove it and look at it.

It's something I would do again, in a heart beat.

Lou
I'm very interested in this "crawfordz flash" did you have to send it to TS? Or can crawford do it? Because I'm actualy visiting crawfordz soon. How much? And what was the process? Thanks!!
Reply
Old Jul 1, 2005 | 01:09 PM
  #8  
Byrnie's Avatar
Byrnie
Registered User
 
Joined: Feb 2005
Posts: 1,365
Likes: 0
From: Vienna (DC Area)
Yo Lek,
Where is crawford located I might go with you if you want company and when?

~Ry
Reply
Old Jul 1, 2005 | 02:28 PM
  #9  
mbq62's Avatar
mbq62
Thread Starter
Registered User
 
Joined: Jan 2004
Posts: 2,022
Likes: 0
From: Fairfax, VA
Crawfordz is in Tenn. Nasville... I actually have a thread about this it would be nice if you posted in there!!
Reply
Old Jul 1, 2005 | 04:46 PM
  #10  
lowrider's Avatar
lowrider
Registered User
iTrader: (1)
 
Joined: Jun 2003
Posts: 91
Likes: 1
From: Tucson, Arizona
Originally Posted by mbq62
I'm very interested in this "crawfordz flash" did you have to send it to TS? Or can crawford do it? Because I'm actualy visiting crawfordz soon. How much? And what was the process? Thanks!!
Crawford doesn't have the facilities do the flash. Crawford and Techno-Square co-developed the flash. Crawford told T/S what they wanted and Fed-Exd ECUs back and forth across the country, until Crawford had what it needed. You send the ECU to T/S in Los Angles, tell them you want the Crawford Flash. You remove it, they flash it, and return it.

T/S site is here:

http://www.technosquareinc.com/g35.htm

Lou
Reply
Old Jul 1, 2005 | 05:19 PM
  #11  
g6g35's Avatar
g6g35
Registered User
iTrader: (6)
 
Joined: Dec 2004
Posts: 401
Likes: 0
G-tofu(Lee) has got his ecu reflashed at AAM and has said nothing but good things about it.
Reply
Old Jul 1, 2005 | 07:02 PM
  #12  
G-Tofu's Avatar
G-Tofu
Registered User
iTrader: (1)
 
Joined: Dec 2004
Posts: 702
Likes: 0
From: Falls Church, VA
i had my ECU reflash at AAM. Definiately, the car goes faster, rev up to 7200RPM, A/F ratio is 12.5....costed me 500 bucks .....IMO, it's little bit pricey but.....it works.....I raced with my buddy IS300 (mods), so I could see the difference.
Reply
Old Jul 1, 2005 | 09:47 PM
  #13  
G35zkyline's Avatar
G35zkyline
Registered User
iTrader: (1)
 
Joined: Jan 2005
Posts: 562
Likes: 0
From: Sterling, VA
what is AAM?
Reply
Old Jul 2, 2005 | 01:36 AM
  #14  
LEK's Avatar
LEK
Registered User
 
Joined: Apr 2005
Posts: 3,921
Likes: 0
Originally Posted by lowrider
Crawford doesn't have the facilities do the flash. Crawford and Techno-Square co-developed the flash. Crawford told T/S what they wanted and Fed-Exd ECUs back and forth across the country, until Crawford had what it needed. You send the ECU to T/S in Los Angles, tell them you want the Crawford Flash. You remove it, they flash it, and return it.

T/S site is here:

http://www.technosquareinc.com/g35.htm

Lou
Thanks Lou!
Reply
Old Jul 2, 2005 | 10:37 AM
  #15  
G-Tofu's Avatar
G-Tofu
Registered User
iTrader: (1)
 
Joined: Dec 2004
Posts: 702
Likes: 0
From: Falls Church, VA
Originally Posted by G35zkyline
what is AAM?
Altered Atmosphere
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
r0cketm0nkey
General Tech Questions
17
Nov 23, 2015 03:34 AM
MrRiv
Engine, Drivetrain & Forced-Induction
0
Sep 29, 2015 04:59 PM
ben-g37s
Engine, Drivetrain & Forced-Induction
1
Sep 22, 2015 01:36 PM
Raffay Khan
Intake and Exhaust
6
Sep 14, 2015 10:47 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:03 PM.