Official mn chat thread
Lol... I'm sorry guys. I always think about these confusing things later at night when everyone brain is tired lol. Like yesterday when I posted the original question, I was in the middle of Good Will Hunting (GREAT MOVIE BY THE WAY) and all the sudden I thought of the question! Anyways, so based on Peng's pic, which I like that stance, I have the two options like Tevi said. And if Peng has the HTechs the STechs will be twice the drop so way too low. Well, its starting to get narrowed down finally lol. Peng, I'd be down to meet up sometime next week for sure. I'll text ya when I'm back.
Prolly gonna have a good buddy of mine ride with me so I may have a chance to snap some pics as well! So tempted to get a T2i before the meet so I can snap 16mp pics and do 1080p Vids!
By the way, how do you add the pic in the text like u did instead of an attachment
Yeah, I've heard the G H-tech's drop is very mild (almost unnoticeable). As for the pic, I image linked it from another site (hotlinking)...in this case, I had it uploaded on my photobucket and just hotlinked it from there. You can do this by right clicking on an image from any site and copying the url for that picture and then in your compose screen on the forum, there's an "insert image" button that pops up a window asking for the url of the image you want to attach. just insert the image url and press ok. There might be other ways too but that's how I do it anyways....
Yeah, I've heard the G H-tech's drop is very mild (almost unnoticeable). As for the pic, I image linked it from another site (hotlinking)...in this case, I had it uploaded on my photobucket and just hotlinked it from there. You can do this by right clicking on an image from any site and copying the url for that picture and then in your compose screen on the forum, there's an "insert image" button that pops up a window asking for the url of the image you want to attach. just insert the image url and press ok. There might be other ways too but that's how I do it anyways....
Thread Starter
NextLevel Performance
iTrader: (53)
Joined: Oct 2009
Posts: 8,659
Likes: 211
From: St Paul, MN
Hossam, you're killin me bro! lol! WHEN I SAY "UNEVEN DROP", and the "floating", i'm 100% referring to the Tanabe NF's, NOTTTTTTT the H-techs. The H-techs(z springs) have the GOOD even drop(front LOWER then the rear), the Tanabe NF's have the BAD uneven drop(front higher then rear).
DO NOT get the G H-techs, there were 100's of guys that posted on the 35 forums that the passanger side wasn't even with the driver side. DO NOT, I repeat, DO NOT GET G35 Htech SPRINGS. If you go htech, 100% go ZZZZZZ H-TECH springs. K? I'll repeat that one more time so I'm clear...>>>>DO NOT GET G35 Htech COUPE SPRINGS<<< If you want the EIBACH springs for the 35 coupe, get the 350z Htech springs.
Okay, now, the only two springs I would get again if I were deciding Hossam, would be between the 350z TANABE GF's, and the 350z Htech springs. Yes, both are for the 350 but work better on our cars then the actual G springs, and I will say 100% you'd be happy with either! I remember looking at the GF's long and hard, and regretted not getting them when i got my NF's.
ps...great quoting skills :-)
DO NOT get the G H-techs, there were 100's of guys that posted on the 35 forums that the passanger side wasn't even with the driver side. DO NOT, I repeat, DO NOT GET G35 Htech SPRINGS. If you go htech, 100% go ZZZZZZ H-TECH springs. K? I'll repeat that one more time so I'm clear...>>>>DO NOT GET G35 Htech COUPE SPRINGS<<< If you want the EIBACH springs for the 35 coupe, get the 350z Htech springs.
Okay, now, the only two springs I would get again if I were deciding Hossam, would be between the 350z TANABE GF's, and the 350z Htech springs. Yes, both are for the 350 but work better on our cars then the actual G springs, and I will say 100% you'd be happy with either! I remember looking at the GF's long and hard, and regretted not getting them when i got my NF's.
ps...great quoting skills :-)
Hossam, you're killin me bro! lol! WHEN I SAY "UNEVEN DROP", and the "floating", i'm 100% referring to the Tanabe NF's, NOTTTTTTT the H-techs. The H-techs(z springs) have the GOOD even drop(front LOWER then the rear), the Tanabe NF's have the BAD uneven drop(front higher then rear).
DO NOT get the G H-techs, there were 100's of guys that posted on the 35 forums that the passanger side wasn't even with the driver side. DO NOT, I repeat, DO NOT GET G35 Htech SPRINGS. If you go htech, 100% go ZZZZZZ H-TECH springs. K? I'll repeat that one more time so I'm clear...>>>>DO NOT GET G35 Htech COUPE SPRINGS<<< If you want the EIBACH springs for the 35 coupe, get the 350z Htech springs.
Okay, now, the only two springs I would get again if I were deciding Hossam, would be between the 350z TANABE GF's, and the 350z Htech springs. Yes, both are for the 350 but work better on our cars then the actual G springs, and I will say 100% you'd be happy with either! I remember looking at the GF's long and hard, and regretted not getting them when i got my NF's.
ps...great quoting skills :-)
DO NOT get the G H-techs, there were 100's of guys that posted on the 35 forums that the passanger side wasn't even with the driver side. DO NOT, I repeat, DO NOT GET G35 Htech SPRINGS. If you go htech, 100% go ZZZZZZ H-TECH springs. K? I'll repeat that one more time so I'm clear...>>>>DO NOT GET G35 Htech COUPE SPRINGS<<< If you want the EIBACH springs for the 35 coupe, get the 350z Htech springs.
Okay, now, the only two springs I would get again if I were deciding Hossam, would be between the 350z TANABE GF's, and the 350z Htech springs. Yes, both are for the 350 but work better on our cars then the actual G springs, and I will say 100% you'd be happy with either! I remember looking at the GF's long and hard, and regretted not getting them when i got my NF's.
ps...great quoting skills :-)
I'll make sure to get the 350s springs for sure. NO G SPRINGS. Thanks for the breakdown guys.
Thread Starter
NextLevel Performance
iTrader: (53)
Joined: Oct 2009
Posts: 8,659
Likes: 211
From: St Paul, MN





