Not sure from the videos, what is the problem? Shifting at 2500?? High idle??

 

Not sure what we just saw looks normal to me.

 

I'm going to take a stab at this even though I'm not sure what I was looking at. He probably screwed up one of the MAF sensors (or both), or got cleaning agent on the sensors.

 

I think you need to reset the butterfly position

 

He cleaned the throttle (it comes after the air intake)



and the RPM is not stable

 

yeah, when he cleaned it. he must have messed with butterfly position which can result in unstable rpm. tell him to perform the butterfly repositioning procedure.

 

hi
mmm
can you explain that more please ?

 

up up up up

 

Throttle valve reposition
<TECHNOSQUARE - PRODUCTS - TECHNOSQUARE - 350Z ECU Reset>

 

if he disconnected the connector or any of the hoses while cleaning his idle is going to be messed up, and it will have to be reprogrammed. the procedure is in the FSM.i believe the procedure is the same for the 3.7 as well. its on page 16. the PDF is to big to attach, so if somebody wants to host it or if you need it i can email it to you. just PM me with your email.

 

I had a high idle on mine even though i never removed any plugs or anything either. I had to do a idle relearn and problem was solved

 

I had an Infiniti I35, and a guy who didn't know what he was doing cleaned the throttle boddies for me. He sprayed something inside, wiped it a bit. Afterwards, it idled at 1,900 RPMs instead of 750 RPMs. I went to dealership, and they reprogrammed it for me - good as new. The tech said the throttle boddies are not meant to be cleaned this way on our cars.

 

I want to clean mine so bad, but so afraid of this happening to me, i dont want to have to go to the dealer for them to fix it since Im not under warranty anymore =/