Link to battery replacement how to?
Its VERY straight forward.
1) Pop the hood.
2) Release the 2 little tabs on the cover that says "battery" and lift it away.
3) Use the correct size wrench to loosen both the negative/positive terminals.
4) Pull out the battery, it can be heavy.
5) Place the new battery back in the battery tray.
6) Attach the positive/negative terminals to the matching colors (red or black) or symbols ( +/- )
7) Replace the plastic battery cover and clip it into place.
8) Save your radio/seat settings all over again.
Profit.
1) Pop the hood.
2) Release the 2 little tabs on the cover that says "battery" and lift it away.
3) Use the correct size wrench to loosen both the negative/positive terminals.
4) Pull out the battery, it can be heavy.
5) Place the new battery back in the battery tray.
6) Attach the positive/negative terminals to the matching colors (red or black) or symbols ( +/- )
7) Replace the plastic battery cover and clip it into place.
8) Save your radio/seat settings all over again.
Profit.
Its VERY straight forward.
1) Pop the hood.
2) Release the 2 little tabs on the cover that says "battery" and lift it away.
3) Use the correct size wrench to loosen both the negative/positive terminals.
4) Pull out the battery, it can be heavy.
5) Place the new battery back in the battery tray.
6) Attach the positive/negative terminals to the matching colors (red or black) or symbols ( +/- )
7) Replace the plastic battery cover and clip it into place.
8) Save your radio/seat settings all over again.
Profit.
1) Pop the hood.
2) Release the 2 little tabs on the cover that says "battery" and lift it away.
3) Use the correct size wrench to loosen both the negative/positive terminals.
4) Pull out the battery, it can be heavy.
5) Place the new battery back in the battery tray.
6) Attach the positive/negative terminals to the matching colors (red or black) or symbols ( +/- )
7) Replace the plastic battery cover and clip it into place.
8) Save your radio/seat settings all over again.
Profit.
There's only one trim piece but it has 5 or 6 clips holding it in. Remove them by popping them up with a flat screwdriver. Also, you will probably need to take the fuse box loose (not remove it) to get more room. It's clipped in, just pull up on it. The nut size on both terminals is 10 mm.
There's only one trim piece but it has 5 or 6 clips holding it in. Remove them by popping them up with a flat screwdriver. Also, you will probably need to take the fuse box loose (not remove it) to get more room. It's clipped in, just pull up on it. The nut size on both terminals is 10 mm.
Wow!! the stock battery without handle was a PIA to get out for real!! what technique is everyone using to take it out?
my replacement battery came w/ a handle & if only the stock came w/ a handle. it is already replaced but wonder how everyone took it out besides lifting w/ 2 hands/arms of course.
my replacement battery came w/ a handle & if only the stock came w/ a handle. it is already replaced but wonder how everyone took it out besides lifting w/ 2 hands/arms of course.
Wow!! the stock battery without handle was a PIA to get out for real!! what technique is everyone using to take it out?
my replacement battery came w/ a handle & if only the stock came w/ a handle. it is already replaced but wonder how everyone took it out besides lifting w/ 2 hands/arms of course.
my replacement battery came w/ a handle & if only the stock came w/ a handle. it is already replaced but wonder how everyone took it out besides lifting w/ 2 hands/arms of course.
Try this
Trending Topics
Registered User
iTrader: (9)
Joined: Feb 2016
Posts: 763
Likes: 140
From: Earths toilet: Houston Texas
I used this (link below) easy, worked perfectly....and you don't need steroids ^^^
Infiniti G37 Battery replacement for all G37 coupes and G37 sedans, including 2007 and 2008 G35 sedan
Infiniti G37 Battery replacement for all G37 coupes and G37 sedans, including 2007 and 2008 G35 sedan
Pop hood
1. Remove all pop out clips
2.lift battery tray
3.10mm socket on battery terminal
4.remove weather strip gromet (cafefully).
5.lift window wipers
6. Remove window wiper cover from windshield
7.10 mm deep socket on battery bracket holder
8. Unhook j hook fitting from battery bracket rear of batter
9. Remove your battery gently/replace all step backwards.
1. Remove all pop out clips
2.lift battery tray
3.10mm socket on battery terminal
4.remove weather strip gromet (cafefully).
5.lift window wipers
6. Remove window wiper cover from windshield
7.10 mm deep socket on battery bracket holder
8. Unhook j hook fitting from battery bracket rear of batter
9. Remove your battery gently/replace all step backwards.
Last edited by Juelz86g37s2012; May 16, 2016 at 03:21 PM. Reason: O
Thread
Thread Starter
Forum
Replies
Last Post








