G37 Sedan

What did you do to your Sedan today?

Thread Tools
 
Search this Thread
 
Old Jan 28, 2019 | 04:41 PM
  #6166  
afrayedknot's Avatar
afrayedknot
Registered Member
5 Year Member
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Mar 2018
Posts: 102
Likes: 11
Originally Posted by obsidiansamurai
GD, that's a lot. I have a similar setup and spent maybe a little over a grand, and that's with my numerous failures included. Mandrel bends are the way to go, but I can't find any in my area. I went crush bent and have no problems so far. If you have HFC's, it may rasp a bit though. I did spray the exhaust with some black paint/rust preventative to hide the ugliness.



You ever get your exhaust situation sorted out? I remember you were having problems with it being too boomy.
Not yet.. Still rocking the magnaflow 3 chambered. For the last 6 months I've just been vacillating between going the custom or aftermarket route. I think I've finally come to a decision to try out a muffler delete with the stock coupe mid pipe. Gonna pair it with an additional set of resonators. I've gotten a lot more accustomed to drone with my current set up, so I should be much more tolerant of any drone in the new setup.
Reply
Old Jan 29, 2019 | 09:38 AM
  #6167  
SupraOfDoom's Avatar
SupraOfDoom
Registered Member
 
Joined: Jun 2016
Posts: 1,071
Likes: 254
From: Milwaukee WI
Originally Posted by Rochester
You've really got me thinking about this...

1. buying a set of reman calipers
2. having them painted
3. swapping them in
4. selling my originals.

This might be the path of least resistance to getting calipers painted, given my situation. I can't get the car up on four jackstands in my garage, it just isn't feasible, and I have feet of clay.

Love that amber/orange, although I'd be wanting a more metallic flake look to the paint, and the INFINITI decals. Either way, well done, Supra.
For the record they are just red, the picture is a little deceiving not really any orange to them IRL. Think it was my kitchen lighting.

Reply
Old Jan 29, 2019 | 10:14 AM
  #6168  
rotarymike's Avatar
rotarymike
Moderator in Moderation
5 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Feb 2017
Posts: 2,936
Likes: 589
From: Charleston
Reply
Old Jan 29, 2019 | 12:36 PM
  #6169  
PNW_IPL's Avatar
PNW_IPL
Registered Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (5)
 
Joined: Mar 2016
Posts: 3,050
Likes: 547
Torque pro app went a little crazy and gave some false reading. Freaked me out for. Sec. Reset app and it oil temp was 187 vs 287.
ordered some tires finally. 275/40/18 square.
Reply
Old Jan 29, 2019 | 06:15 PM
  #6170  
doctorg37xs's Avatar
doctorg37xs
Registered Member
 
Joined: Aug 2016
Posts: 127
Likes: 15
From: MA
you bought these already powder coated? from where?

Originally Posted by SupraOfDoom
Bought an extra set of remaned akibono's. Just put the decals on today. Can't believe how lucky we are to have such affordable access to such big brakes. $250 for powdercoated remans? Heck I'll take 2.

Reply
Old Jan 29, 2019 | 06:54 PM
  #6171  
SupraOfDoom's Avatar
SupraOfDoom
Registered Member
 
Joined: Jun 2016
Posts: 1,071
Likes: 254
From: Milwaukee WI
Originally Posted by doctorg37xs
you bought these already powder coated? from where?


https://www.jegs.com/webapp/wcs/stor...ear=4294829591

When I ordered they had a coupon for $25 off too. The cheapest place I saw them was on ebay, seller was brakemotive. I think they were $220-230 shipped, but they were out of stock last I checked. I did direct message them and they said they would be getting more.
Reply
Old Jan 29, 2019 | 07:46 PM
  #6172  
Rochester's Avatar
Rochester
Administrator
15 Year Member
Loved
Community Favorite
Top Answer: 1
iTrader: (9)
 
Joined: Nov 2010
Posts: 19,829
Likes: 5,137
From: Rochester, NY
Originally Posted by SupraOfDoom
https://www.jegs.com/webapp/wcs/stores/servlet/SearchResultsPageCmd?Ntt=calipers&Tab=SKU&make=429 4828716&model=4294828413&submodel=4294829842&year= 4294829591

When I ordered they had a coupon for $25 off too. The cheapest place I saw them was on ebay, seller was brakemotive. I think they were $220-230 shipped, but they were out of stock last I checked. I did direct message them and they said they would be getting more.
Those sure look like Akebono calipers. $286 shipped for a full set, rebuilt? Just add pads. That right?
Reply
Old Jan 29, 2019 | 08:24 PM
  #6173  
doctorg37xs's Avatar
doctorg37xs
Registered Member
 
Joined: Aug 2016
Posts: 127
Likes: 15
From: MA
I’m so confused. Are these akebono or power stop? I just bought a used set of akebono’s from a 370z for $550 and they still need to be powder coated. I’ll be kicking myself if I could have had them already powdercoated for $300!

Originally Posted by SupraOfDoom
https://www.jegs.com/webapp/wcs/stor...ear=4294829591

When I ordered they had a coupon for $25 off too. The cheapest place I saw them was on ebay, seller was brakemotive. I think they were $220-230 shipped, but they were out of stock last I checked. I did direct message them and they said they would be getting more.
Reply
Old Jan 29, 2019 | 08:46 PM
  #6174  
SupraOfDoom's Avatar
SupraOfDoom
Registered Member
 
Joined: Jun 2016
Posts: 1,071
Likes: 254
From: Milwaukee WI
Originally Posted by doctorg37xs
I’m so confused. Are these akebono or power stop? I just bought a used set of akebono’s from a 370z for $550 and they still need to be powder coated. I’ll be kicking myself if I could have had them already powdercoated for $300!


Originally Posted by Rochester


Those sure look like Akebono calipers. $286 shipped for a full set, rebuilt? Just add pads. That right?
They are Akebono's 99% sure. Some people have gotten them with oem serial numbers still not entirely grinded off because that's what they do before remaning them. As far as pads, yes as long as you already have the sport package. This deal is unbeatable.
Reply
Old Jan 30, 2019 | 05:50 PM
  #6175  
iCrap's Avatar
iCrap
Registered Member
10 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Nov 2015
Posts: 3,514
Likes: 610
From: Maryland
Wait what the hell? under $300 shipped for OEM big brakes?
Then I just need the pads and rotors right? That's crazy. I think I found my next spring mod.
Reply
Old Jan 30, 2019 | 05:58 PM
  #6176  
Itsjdmyo's Avatar
Itsjdmyo
Registered Member
 
Joined: Nov 2018
Posts: 36
Likes: 7
Debagded the Infiniti sign in the rear. Just need for the weather here (Vancouver, wa) to treat us nice so I can do a full detail!


Reply
Old Jan 31, 2019 | 09:43 AM
  #6177  
SupraOfDoom's Avatar
SupraOfDoom
Registered Member
 
Joined: Jun 2016
Posts: 1,071
Likes: 254
From: Milwaukee WI
For those who are interested in the remans, Brakemotive has them in stock again at the cheapest price.
Reply
Old Jan 31, 2019 | 10:05 AM
  #6178  
RMB5190's Avatar
RMB5190
Super Moderator
5 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Dec 2016
Posts: 3,105
Likes: 504
From: Maryland
My wife is going to kill me lol....send help
Reply
Old Jan 31, 2019 | 10:09 AM
  #6179  
Rochester's Avatar
Rochester
Administrator
15 Year Member
Loved
Community Favorite
Top Answer: 1
iTrader: (9)
 
Joined: Nov 2010
Posts: 19,829
Likes: 5,137
From: Rochester, NY
Originally Posted by SupraOfDoom
For those who are interested in the remans, Brakemotive has them in stock again at the cheapest price.
$239 shipped, for a full set of rebuilt Akebono calipers?
Reply
Old Jan 31, 2019 | 10:14 AM
  #6180  
SupraOfDoom's Avatar
SupraOfDoom
Registered Member
 
Joined: Jun 2016
Posts: 1,071
Likes: 254
From: Milwaukee WI
Originally Posted by Rochester
$239 shipped, for a full set of rebuilt Akebono calipers?
Yes, rebuilt + powder coated . I might order another set in a couple weeks when I get my tax returns lol. I'm guessing they ship from the same location as Jegs, both are located in IL.
Reply



All times are GMT -4. The time now is 08:26 AM.