It looks like they make that wheel in a +35 offset which would be much better fit at the fender. I'd still look at other 5 spoke wheels w/ a similar style in a 8.5 to 9" width.

Don't know if you like this style but these are flow formed which are a lighter & stronger casting process and they have these in a 19x8.5 +35 and an even better 19x9 +35, and they only weigh 21 pounds
Ultraform - Konig Wheels

 

Offsets are a bit backwards to understand, but basically the more positive the offset the further in the wheel is from the fender. So a +30 will stick out 15mm more than a +45. And most of the stock Infiniti wheels are in the +43 to +45 offsets.

 

Did you know your speedo is wrong? My RWD sedan read 7% fast according a GPS I installed on my phone. I believe it, too. I was prompted to check because I was always the slowest car when I drove at the speed limit. Never had that happen before. A larger than OE diameter will help that. I went from 245/45-18 to 255/45-18 just to reduce speedo error to 5% fast -- makes calculating true speed easier.

 

If you're lowered, you'll want offsets in the 25-35 range for a 9 inch wheel to get them to be flush. This is just a general number range, of course depending on how low you are and how flush you want them, you will have to adjust those numbers. Spacers should be a last option, such as when the wheels you really want don't come in the ideal offset.

 

Looking for a set of 19' coupe wheels for my 2013 G37S sedan. This is likely a stupid question, but am having troubles trying to find a set. Do you guy shave suggestions on where one can find them?

 

Should be at least a few on your local Craigslist. Otherwise eBay, and sometimes they show up in the private classifieds here as they are a pretty popular item.

 

What are the specific OEM part #'s I should be looking for in the set?

 

Google is your friend, but since I'm nice and bored at work, here.


2008-2010 version:
Front: D0300-JL14A
Rear: D0300-JL14B


2011+ version:
Front: D0C00-1NL4A
Rear: D0C00-1NL4B

 

Tire inflators, under $50.00 can anyone recommend a good one? eg Amazon, thanks.

 

Emergency use or regular use? If just emergency use I've got one like I've used far too many times. If you want something heavier then something like should treat you well.

 

finally took the plunge for new summer tires/rims...pix to come but wanted to thank everyone in here for the help!

 

Finally got around to mount my G35 Rays (19") wheels...running Conti's DWS06's 245/40/19 on all four. Was waiting on the set of black chrome lug nuts and Gorilla locks to arrive, finally arrived... gonna ride stock height for a week and see about putting my SWIFTS on... no rush though. I plan on taking some pix after I get around washing the car.

 

Do you have a part # for those lug nuts? Finding the OEM mag-style type in anything other than chrome is a tough find.

 

^ hey Brad, I have the packing slip at home, I'll update later but for the G35 Rays wheels that I have take acorn style lugs. Not sure of the part number for mag style.

 

Which G35 Rays do you have? AFAIK they all take the mag style, but could be misinformed (won't be the first time, lol)