Won't shift completely into park
Not sure what's causing this but there is a pin underneath the gearbox that clicks when you change gears - Maybe that is broken? not too sure about this but guessing right now
I'm sure someone can help you in time. Good luck
I'm sure someone can help you in time. Good luck
Trending Topics
I have this happen all the time. There's a pin that gets stuck under the shifter. If you have an aftermarket shift **** it may be on too tight. If its stock that white pin may just be getting stuck in a less than full released position. Try taking the **** off and lubricating. This always seems to work for me. Really frustrating issue though
still no luck. the white pin that goes into the shifter seems to be working correctly. It locks into park and won't let me go into reverse. but still indicates the light on gauge cluster, and constant beeping.
Have you read this?
https://www.myg37.com/forums/g37-cou...in-park-2.html
Last few posts hopefully will give you some additional ideas..
https://www.myg37.com/forums/g37-cou...in-park-2.html
Last few posts hopefully will give you some additional ideas..
This happened to me this morning... 2013 G37 Sedan. I drove it to the dealership and let them worry about it - the car is under full warranty anyway.
I will post here when I get an explanation.
I will post here when I get an explanation.


