Engine, Drivetrain & Forced-Induction
Have Technical Questions or Done Modifications to the G37? Find out the answer in here!

Review Cobb Access Port

Thread Tools
 
Search this Thread
 
Old Dec 19, 2008 | 08:37 PM
  #16  
RedG37SNC's Avatar
RedG37SNC
Thread Starter
Registered User
 
Joined: Dec 2007
Posts: 2,112
Likes: 4
From: Charlotte, NC
A user responded to my question about valet and antitheft modes burn time and stated since they aren't full maps they load in seconds, I've yet to confirm that, but that would address the issue.

Last edited by RedG37SNC; Dec 19, 2008 at 08:52 PM.
Reply
Old Dec 19, 2008 | 08:49 PM
  #17  
RedG37SNC's Avatar
RedG37SNC
Thread Starter
Registered User
 
Joined: Dec 2007
Posts: 2,112
Likes: 4
From: Charlotte, NC
Originally Posted by chris9012
nice review damn you have me scared with tanabes going into drone with hfc's. i just ordered tanabes and have berks
Black betty has that setup and stated it's a slight drone, I have a Y-pipe so I'd imagine it would be even worse for me. You'll have to let us know how it sounds.

Last edited by RedG37SNC; Dec 19, 2008 at 09:01 PM.
Reply
Old Dec 19, 2008 | 11:41 PM
  #18  
G35_TX's Avatar
G35_TX
Premier Member
iTrader: (3)
 
Joined: Feb 2004
Posts: 102
Likes: 0
From: San Antonio, Texas
Originally Posted by G37Rider92649
Correct me if I'm wrong, Uprev is a software used with a laptop going into your obdII etc. and a tuner sitting there tuning it. Of course it's going to load faster, comparing it to a little pocket console that comes with Cobb Uprev is nice though, all the g35s and 350z use it for NA, but im going to try a different route for fun.
Sorry but UPREV is used for Mods like FI especially. It is more powerful than all the add-on modules like UTEC, emanage, etc.

It also works like Cobb. You can have it tuned and ready to download from them, and all you do is buy the software and flash the ECU with your laptop. Any mods you add, you tell them what mods, do a log with a few runs 0-60, etc and send it to them. They adjust it, send you the map, and bam you got more power with your mods. Or you can pay for the higher package and actually tune it yourself, or have someone tune it for you.

Cobb can not be compared to UPREV really. UPREV is in a higher level of tuning than Cobb is at the moment. Especially nice you can switch between 5 different maps with the cruise control buttons.

Their latest tune:

http://my350z.com/forum/shop-builds/...k-testing.html

583 hp and 527 TQ with the 3.5L HR bone stock engine with a Greddy TT kit and tune from UPREV with no add-on modules only the stock ECU controlling everything.

Last edited by G35_TX; Dec 19, 2008 at 11:46 PM.
Reply
Old Dec 20, 2008 | 12:07 AM
  #19  
MaxToTheG37's Avatar
MaxToTheG37
Super Moderator w/ Boost
iTrader: (3)
 
Joined: Dec 2007
Posts: 7,042
Likes: 5
From: Knoxville TN
UPDATE:

I talked with John at Cobb for about 30 minutes today and He is planning on working with Sharif @ Forged on a custom tune for me and with my certain mods... Goin to go down around 3pm EST...

W00t!!!!!!!
Reply
Old Dec 20, 2008 | 12:54 AM
  #20  
jnguyen's Avatar
jnguyen
Registered User
iTrader: (16)
 
Joined: Jul 2008
Posts: 6,128
Likes: 2
From: Louisiana
Originally Posted by MaxToTheG37
UPDATE:

I talked with John at Cobb for about 30 minutes today and He is planning on working with Sharif @ Forged on a custom tune for me and with my certain mods... Goin to go down around 3pm EST...

W00t!!!!!!!
too bad i already work a deal to get some stillen 3g so i cant ask you for your tune
Reply
Old Dec 20, 2008 | 01:15 AM
  #21  
EVO-to-G's Avatar
EVO-to-G
Registered User
iTrader: (4)
 
Joined: Oct 2008
Posts: 937
Likes: 0
From: North Jersey
^^there working on a map now for the gen 3's. and i'll be dynoing my car on sunday with the gen 3's and then add in the cobb ap and if john is free we will be working with him to try and get a custom map done the same day.
all i have now is berk hfc's
Reply
Old Dec 20, 2008 | 01:43 AM
  #22  
jnguyen's Avatar
jnguyen
Registered User
iTrader: (16)
 
Joined: Jul 2008
Posts: 6,128
Likes: 2
From: Louisiana
Originally Posted by EVO-to-G
^^there working on a map now for the gen 3's. and i'll be dynoing my car on sunday with the gen 3's and then add in the cobb ap and if john is free we will be working with him to try and get a custom map done the same day.
all i have now is berk hfc's
really? so what will it be for cause i want cobb but im just gonna keep my car with stillen 3g and FI exhaust
Reply
Old Dec 20, 2008 | 01:44 AM
  #23  
shumby's Avatar
shumby
Registered User
iTrader: (3)
 
Joined: Sep 2007
Posts: 2,668
Likes: 5
From: With your mom
you need some HFC's boy
Reply
Old Dec 20, 2008 | 02:26 AM
  #24  
jnguyen's Avatar
jnguyen
Registered User
iTrader: (16)
 
Joined: Jul 2008
Posts: 6,128
Likes: 2
From: Louisiana
Originally Posted by shumby
you need some HFC's boy
i want some FI hfc but i dont know if it wil be too loud. i already like my exhaust sound and its already pretty loud so i dont know how much louder HFC makes it plus stillen 3g

Last edited by jnguyen; Dec 20, 2008 at 02:28 AM.
Reply
Old Dec 20, 2008 | 02:49 AM
  #25  
G37Rider92649's Avatar
G37Rider92649
Banned
iTrader: (13)
 
Joined: Dec 2006
Posts: 10,108
Likes: 4
From: SoCal...OC..714..
Originally Posted by G35_TX
Sorry but UPREV is used for Mods like FI especially. It is more powerful than all the add-on modules like UTEC, emanage, etc.

It also works like Cobb. You can have it tuned and ready to download from them, and all you do is buy the software and flash the ECU with your laptop. Any mods you add, you tell them what mods, do a log with a few runs 0-60, etc and send it to them. They adjust it, send you the map, and bam you got more power with your mods. Or you can pay for the higher package and actually tune it yourself, or have someone tune it for you.

Cobb can not be compared to UPREV really. UPREV is in a higher level of tuning than Cobb is at the moment. Especially nice you can switch between 5 different maps with the cruise control buttons.

Their latest tune:

http://my350z.com/forum/shop-builds/...k-testing.html

583 hp and 527 TQ with the 3.5L HR bone stock engine with a Greddy TT kit and tune from UPREV with no add-on modules only the stock ECU controlling everything.
Thanks for telling me something I already know, good info for other people though, maybe I put it in a stupid statement haha, but yeah I would know, I'm coming from a boosted g35 with a hks fcon vpro standalone, and it had the gtm ecu flash on it also. Utec, Emanage, how cute
Reply
Old Dec 23, 2008 | 05:16 PM
  #26  
chris9012's Avatar
chris9012
Registered User
iTrader: (1)
 
Joined: Jun 2007
Posts: 245
Likes: 0
From: long island, ny
Originally Posted by RedG37SNC
Black betty has that setup and stated it's a slight drone, I have a Y-pipe so I'd imagine it would be even worse for me. You'll have to let us know how it sounds.
black betty wasnt lying. there is tiny drone. but it is loud i can see why he sold them like i did not except it being this loud. it sounds GREAT though sometimes noise is annoying in 5th accelerating and cruising(5at would be great with the new 7at) but im getting used to it
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Amaadkhan2k
Audio, Video & Electronics
4
Oct 4, 2024 01:20 PM
ANMVQ
G's FS
42
Dec 8, 2016 04:55 PM
delfinparis
Audio, Video & Electronics
2
Nov 16, 2015 02:26 PM
mikysee
Audio, Video & Electronics
0
Sep 28, 2015 11:18 AM
sharmelan
Audio, Video & Electronics
5
Sep 23, 2015 11:48 AM




All times are GMT -4. The time now is 04:59 AM.