Originally Posted by quakerroatmeal

Ok I talked to a buddy of mines who I call the suspension guru. Anyways I was wrong about the lockout washers. They ONLY work in conjunction with toe arms. Which means true coils..

Other alternative option is to take your spc toe kit to a machine shop and have them machine you new eccentrics. Read here more about it

MY350Z.COM Forums - View Single Post - Any other toe bolts out there besides SPC?

Another option is to buy the SPL titanium rear mid link. Which is insanely expensive.

Pretty much three choices

1. True coils with lockout washers + toe arms (which he say is the best)
2. Have shop custom machine you new eccentrics (cheapest option)
3. Buy those SPL titanium rear mid link to have complete control over toe (most expensive it seems)

Originally Posted by TVPostSound

https://www.myg37.com/forums/3548463-post1.html

Or have offset lockout plates made to match your eccentric position!!
Then adjustable traction rods for micro adjustment.

Originally Posted by Topher9425

Speaking of true coils......Are Stance GR+ (Stance SS) true coils in the rear? Planning on buying a set, and damn google images shows both for our cars. lol

Originally Posted by Topher9425

Now are traction rods the same as toe rods? Either way, the basket needs to go, correct?

Originally Posted by Topher9425

But you state that these are only good for mild drops with swift and/or eibach, or else its too low.........

Originally Posted by TVPostSound

The offset I used was only good for mild drops, as Im selling a second set I made.

You can make a set with double the range.