I have a 09 G37S coupe and i wanna change the reverse lights to L.E.D.S but i just wanna make sure im doing it right, so those anyone know how to access them? i tried searching and couldn't find anything. Thank You in advnace!

 

They have 3 push pin on each side on the inside. use a flathead to pop those off. Pull the rug back and you have access to 3 bolts. They should be a 8mm or a 10mm. unscrew those 3 then get a hammer or mallet and bang on the end of the screws. it should pop the tailight right out.

If you have problems then I will make a DIY for you. Doesn't take long and it should be easy

 

Make sure you get high powered LED's or else you will not be seeing any noticeable light output when in reverse.

 

Just tried to install these 921 LED for my reverse lights and they dont fit!!

Did i buy the wrong one??

please help

 

See the LED's I used, nice and bright and the DYI is pretty easy. There are several out there, just search. I would use the "Pull Hard" method and not the "Tap with a hammer" method though. You don't want to crack the plastic that encases the bolts.

https://www.myg37.com/forums/body-in...-used-fyi.html

 

Yes you did ... there are tons of posts on the subject.

 

wtf.....

 

^^^^ That video is FAIL! :P

 

....im so confused right now?

 

Wheres the posts on this issue? Do i need to "search"