When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Any chance you might still have that word doc? The only thing left in this thread I can find are the photo bucket photos that won't hardly load plus have no explanation.
Dave
Sorry man, Bossho hasn't logged in on over 6 years...very unlikely you'll get any reply from him...the Photobucket debacle from a couple of years ago has really screwed over so much information posted on forums, if you come up with a new solution for this issue please start a new thread and post up about it, good luck
Sorry to revive an ancient thread but I could use some help. I am going to alter the bolsters in my sport seats (Im a big guy and they are too tight), but not sure where to cut the metal bar....and it seems the thread pics have disappeared.
Do I cut the bar at the posts or along the top?
Thanks to anyone that has done this and can advise.
Full disclosure- it has been well over 10 years since I helped my neighbour with this project and both he and the car are gone. That said, IIRC, you just cut the brace at the 2 weld joints and use a file to smooth over any rough edges.
You are just removing that wire piece from the main seat frame. Others may correct me if I am wrong but I am 99% sure that is how we did it on his car.
