Dashcam hardwiring. Please help

Reply Subscribe

Thread Tools

Search this Thread

Sep 14, 2018 | 07:58 AM

#16

Landshark

Registered Member

Joined: Aug 2015

Posts: 1,386

Likes: 188

Quote:

Originally Posted by NealP

If he were to go that route then he's better of keeping the cable he has and just chopping off the fuse end and connect that to the tap.

i was assuming it was some expensive B.S. considering it was from BB, but looks like it was only $15 ... so hack away! LOL

Sep 14, 2018 | 01:37 PM

#17

silentmind

Thread Starter

Registered User

Joined: Dec 2013

Posts: 7

Likes: 0

From: CA

Quote:

Originally Posted by Landshark

i was assuming it was some expensive B.S. considering it was from BB, but looks like it was only $15 ... so hack away! LOL

it was $10 LOL

Sep 19, 2018 | 04:16 PM

#18

IMfam0us

Registered Member

iTrader: (1)

Joined: Feb 2018

Posts: 117

Likes: 5

From: Midwest

I've got the same brand dash cam and hardwire harness. I just pulled one of the 10amp fuses and inserted that one. I think the audio one? I cant remember. Turns on at start up and off when shut down. The dash cam has a sensor inside it so if the car gets bumped it should auto pop on as long as it has a decent charge in it. Never had a problem and it's been 6 months

Oct 1, 2018 | 11:46 AM

#19

silentmind

Thread Starter

Registered User

Joined: Dec 2013

Posts: 7

Likes: 0

From: CA

Quote:

Originally Posted by IMfam0us

I just got it hardwired to cig lighter fuse. It also only turns on at start up. I wanted to connect to a hot fuse that is always on (not sure which fuse though), but im afraid it would kill my battery..