DIY Front Splitter
#1
Registered User
Thread Starter
DIY Front Splitter
I am interested in designing my own front wind splitter for the G37. I've looked up numerous front lips for the G37 and they all seem to be priced at $400-$600 with shipping and I find that outrageous. I am an engineer, and I want to try and design a splitter such as the following using Autocad and getting it custom fabricated. As of now I am working on the design process and getting estimates. The material will be 1/4" HDPE with a radius as shown. I am open to suggestions.
#3
Registered User
Thread Starter
#5
#7
Registered Member
iTrader: (1)
are you going for form or function? i'll be making my own splitter as well but i have to finish my front bumper first.
plywood is a common material used and a lot of people have been built their own with it. i would suggest taking a look here for some ideas
-> DIY plywood front splitter for Evo 8/9 - evolutionm.net
and here for a very basic overview of the aerodynamics
-> Tech | APR Performance
let me know how your design goes
plywood is a common material used and a lot of people have been built their own with it. i would suggest taking a look here for some ideas
-> DIY plywood front splitter for Evo 8/9 - evolutionm.net
and here for a very basic overview of the aerodynamics
-> Tech | APR Performance
let me know how your design goes
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
lobuzz311
D.I.Y. Installations/Modifications
16
10-17-2016 08:59 PM
i heart ricers
Body Interior Exterior Lighting
12
12-09-2015 04:15 AM
WillCo1
Wheels & Tires
5
08-25-2015 02:25 PM