Nope, those wheels will be poking way outside the fenders on a Sedan, even on a coupe it's way aggressive. For those width wheels you'd need offsets in the +35 range in front and +45 in back along w/ a slightly stretched 275 on that 11". Also you have to be very careful w/ tire sizing on your AWD, the front & rear diameters need to be under 1% difference to keep your AWD system working well at higher speeds. Welcome to the site BTW.

 

Thanks ✌🏽️

 

I used to run square 19x11 +15's on 275/35/19 tires, and didn't have any rubbing problems (X Coupe). I'm lowered enough to close the fender gap, but not slammed. Also wasn't running extreme camber it was somewhere around 1.8-2.0. There was too much poke though, and looked a little weird. I would definitely recommend a +25 or higher offset.

 

Those coupes have about 15mm more room at the fenders vs. the sedan, that's some tight fit there^^^

 

Thanks and have 2 more questions guys

1) 19x10.5 offset 43 do you guys think that will fit ?

2) 19x9.5 offset 12 will fit ?

I don't want to do any camber thanks in advance

 

Hey Rey,
after switching from the 19x11 i went with a 19x9.5 +15 245/35/19 and its pretty much flush with the fender, no rubbing at all.

 

Hay Ray, you should post these questions up in the wheel/tire folder, and be sure to mention you have a sedan Wheels & Tires - MyG37