I am thinking of running a 19x12 in the rear with a +34 offset. The Question is will the inner clearance fit. What i am worried about i see some guys running a 10.5 +45 offset wheel which works but i would have 8mm less of inner clearance with my wheel width and offset. Will i run into any issues of rubbing in the inside towards the suspension or am i good to go.

I used this website to determine the offsets and specs.

http://www.1010tires.com/WheelOffsetCalculator.asp

 

Someone correct me if I'm wrong, but that sounds like uncharted territory. I'll do some more looking around but I think the best bet you'll have is finding someone running an 11" et45 or so for comparison.

Also, I know you didn't ask this, but I think you're going to have a lot of issues fitting a 12" wheel without going widebody.

 

Ya man you can run that. There is a guy on here running 19x12 his name is Jorge

 

I ran a 11+15 with no issues if that helps.

 

Thanks for the heads up

 

Jorge is wide body

 

he wasn't always widebody though... he went widebody after his accident.

 

widebody G37?? must see this.

 

19x12 in the rear is what jeorge is running and he was rubbing his suspension pretty bad. his offset was 20 which means your 34 offset will not work period.