These are hub rings..they're normally plastic and go on the back of the wheel. Discount Tire should be able to get you some / or have some in stock.

 

Anyone know the dimensions of hub rings needed for our cars and Stance wheels?

 

Does the vibration ease off as you pass 80mph?
Then it's the wheel balance.

 

If doscount tire does the hub rings then that would be awesome!! Because I bought my tires from there and I can get my balance and the hub ring thing done there at the same time! And I haven't gotten passed 80 mph so I don't know.

 

Thanks for all the help. I talked to discount tire and I'm getting a balance done with Hub Rings installed tomorrow.

 

Why get a balance done when the hub rings are most likely the cause of your issue? You're wasting $

 

It is free. i bought my tires from there with warranty so not wasting any money. But thanks.

 

If you are missing hub rings lmk, i will send you 4 today. For future reference our center bore is 66.1 and hub rings needed are 73.1 to 66.1!

 

Thanks but I already got some from discount tire. They took my wheels measurements and had some in stock so I think I'm good. But is 66.1-73.1 like the hub ring measurements? I've never done hub rings before so I really have no idea.

 

Diego...you can hook me up if you can!

 

our center bore that our stock wheels mount over is 66.1. They are exact fit so you dont need a hub ring. Your wheels are 73.1, which is bigger so they can fit on multiple different vehicles (each manufacturer is different). As such, you need a spacer that fills that void, which is what the hub ring does and will stop the vibrations

 

I would get aluminum rings over the plastic ones. Just a personal preference but seems much stronger to me. Not sure it really matters all that much tho

 

There is an outer and inner to hub ring measurements. 73.1 is outer to 66.1 inner.

 

Thanks! I will make sure discount tire have these same measurements.