The toe is within spec, although to the more extreme side of spec. The range is .00 to .20 and im at .15 which seems ok to me. Our cars may not come stock at -1.5 but it is within the stock range. If you look at your rear wheels you can definitly see the camberwhen stock....

 

ghey thread.

 

So guys, looks like I'm going to run invos up front and neo gens in the rear and have my camber adjusted again by a professional shop...

 

toe is what kills tires NOT negative camber like everyone has been saying. change your toe to 0 and your tires will last a lot longer.

 

I second that.I work at a wheel and tire shop and have seen people blow out tires in less than a month/2k miles and it's always because of the toe.

 

Thanks guys, my only worry is the SPC camber kit wont allow toe to go that far, i may need to buy the stillen toe arm!

 

You should have no problem getting to 0 toe with SPC camber kit (and toe bolts which are part of the kit).