Category: Audio/Video/Electronics
Price: $800
Private or Vendor Listing: Private Listing
Part fits: 2010+ G37 Coupe, 2010+ G37 Sedan, 2008-2009 G37 Coupe, 2008-2009 G37 Sedan
Location (State/Prov): Can-ON
Item Condition: Used

Did some clean up and I thought I have sold this but I guess I was wrong.

Practically complete 2010+ Navigation swap. I say practically because if you're coming from a non-navi G37 you'll need one plug. I can't seem to find it, its part of the main harness. However, if you're going from a 2008+ Navi then you already have the plug. I've attached wiring diagram pin outs for 2010 Bose with Navi and 2009 Bose with Navi. You will have to match the wires with the associated plug.


Includes the following (all pictured):
- 2010+ hard drive with CD changer
- 2010+ screen
- 2010+ navi controls
- 2010+ front faceplate
- 2010+ harness missing one plug. I'll get the PDF to show you which plug it is
- 2010+ USB harness (actual USB adapter not included, I never used it)
- 2010+ RGB cable (the most important cable that attaches screen to hard drive)


Looking for $800 USD shipped. Item located in Toronto, Canada.

Edit: added wiring diagram pin outs to convert 2008-2009 to 2010+

 

A little pricey don't you think? Other forum members have sold for cheaper. Just my 2 cents. Free bump though.

 

I looked at the classified and only thing I found was $300 for screen and hard drive only. no harness or rgb plug. it is OBO shipped.

 

I didn't even know this was possible. If you could message me the pdf or whatever details this needs to work I can give you an offer.

 

This is what I used to install it on mine.

https://www.myg37.com/forums/d-i-y-i...with-bose.html

 

PM me. I'm local to you. What plug is missing and what is needed for?
Also, I have a 2008 G35, but I'm sure this works if it's installed properly (since you have the updated G37 screen as well).

 

PM'd you, but posting for anybody else that is interested in the knowledge.

Basically this plug was not required for me as my 2008 G37 6MT navi already had the plug. I purchased the harness plugs anyways. Did not end up using it as my existing navigation had the plug. I just had to move the ground location to a different plug. This plug pretty much powers the head unit.


Attached is a picture of the missing harness, circled in blue. Picture is from the DIY PDF. for those who have navi already this plug already exists.