cool! im down w/ any help.

yah, anyone else interested? ...most saturdays work for me.

 

Well if you don't find any help we are a local shop and we are always willing to use our lift and show you step by step how to do it. A small donation to support local shops would be required.

Thanks.
Jeff @ 2 Visions

"We were once DIY'ers as well, now we just do what we love everyday! Support local shops before they disappear and there is noone to offer help with aftermarket products. Remember, it all goes around and around."

 

Just got the customautomesh.com lower grill mesh. Anyone have any experience installing these?

 

Chris and I did his, it was really easy. Give me a call this afternoon...

 

I'll give you a call tomorrow.

 

Just want to let everyone know that I am in the process of purchasing a professional grade brake power bleeder.

You're supposed to flush the fluid every year because it's hydroscopic...

 

I don't know what hydroscopic means but I could use a good brake fluid flush.

 

i'm gonna need some help installing an hks rear section... hopefully i'll have it in early next week

 

2 minute process. Give me a call Giri, if you want to stop by my work I'll do it in the parking lot. Who are you ordering the HKS from- I need one too!

 

hey boris, you've got PM

 

Well if you don't find a good deal, let us know. Support local business!

 

Anything go'n on this saturday? I just picked up a Crank Pulley looking for some help to put this in. If i can squeeze this mod in before the Dyno day that would be awesome.

 

I'm helping a friend with an 01 Lexus GS300 do his 90k service for which the dealer charges over $1,000!

Free otherwise...

Feel free to drop by and I can give you a hand. I've never replaced the crank pulley before so it'll be a first time for me. I think a special tool might be neccessary to hold the original crank pulley in place... do you have any install instructions?

 

Yea i know how how much they charge for the 90k, I had to deal with that with my old gs300.

I've never installed a pulley myself either, so I'm not exactly sure what kinds of tools are needed. But I heard that an impact gun will get it out easily thats if it can get in there. I do have instructions provided by KJR.

 

does anyone have CARB approved headers? Has anyone installed headers themselves before?