Alright so I am getting close to having to doing front brakes on my 2015 Q40. The rears still have a large amount of meat on them still so I am not going to do them until needed. My question is if I get the front Akebono kit from Z1 would they fit my car. I have Enkei wheels 18x8 +45mm offset, square set up. I am not opposed to putting 5mm spacers on if need be or even 10mm spacers. I just don't want to order them when the time comes for me to replace the front brakes and then find out once everything is off that I need to add spacers for the clearance. If anyone could weigh in it would be greatly appreciated. Still have a few miles to go.

 

I'm having trouble finding which wheels you have. Can you post a picture?

 

There is a template in the brakes sub-forum that you can print out and test fit before you pull the trigger. It might be in the brake upgrade diy thread.

 

18x8 45mm offset.

Excuse the filthy wheels

 

those wheels look to be Enkei PX-10. I originally thought you were asking about an OEM enkei wheel.
I agree with BeeW, i can't find a reference vehicle that has large calipers with those specs, so its best to just print out the template and check for clearance that way

https://www.myg37.com/forums/brakes-...templates.html

 

I just printed out the template is it just me or does it appear to be a rear mounted caliper for the front? Idk i might just be looking at the template backwards. I will check later on today to see if they will clear with the template.

 

Never mind. Just was looking at them backwards my printer flipped the image.