Hey guys! Been a while. Finally started doing some tinkering with my '13 G37x

So I just ordered the Swift springs, 4N907 I believe. Should make the car look much nicer with that awful wheel gap closed up a bit. Next is wheels and tires. I already went through quite a bit of that "Squared Set Ups" thread and I think that's the direction I wanna go, makes everything easier for AWD and rotations, etc.

I have 💩 roads around where I'm at and I drive my car in the winter/snow. Along with a mountain of a driveway.

Question is, what is a good wheel/tire size and offset? I think I want more of a flush set up, or close to it. So I was thinking of sticking with 18's and stock offset (+45?) for now, possibly adding spacers later to achieve a different look. Or maybe, 19's with a lower profile tire?

I guess the concern is rubbing. If I hit a hard bump I don't want the tire to crumple the fender, but I'm still trying to achieve a nice look here while maintaining some functionality.

Thanks guys

 

9" width. +40 to 45 offset.
or 9.5" width and 45mm offset.
245mm tyre

good luck!

 

here is Blnewt's setup
18x9.5 +38 on 245/45R18
https://www.myg37.com/forums/18/2765...ml#post4044919

 

Not to hijack the post but i'm also in the market for the rims. Currently I'm looking at 19x9.5 +35 offset and putting a 245/45/19. Check out the wheel and tire section threads for each rim size.
https://www.myg37.com/forums/wheels-411/

 

that set up looks like exactly what I would want if I went with 18's thank you!

 

Most people I saw in the mega thread seemed to run 245/40/19 with 9" width. But as I'm sure you know, I'm having trouble finding 9" wheels I like lol. 9.5" seem much more common. I'm still pretty sure I won't have fitment issues with a 9.5" and around that offset of +35