I love the rear end of this car. Is that an aftermarket rear bumper and trunk?? If so, where can I get them? lol If stock is mild, this is wild in all the best ways!

 

 

Dang, I was looking more at the exhaust lol Those are some wide wheels out back!!

 

Some updates.

 

So I have heard that the 245/45/18 tire will work on the front wheels on a G37s. I mentioned to the dealer about putting some one and they cautioned me as it might throw off traction control. Has anyone done it, and any problems? I try to save as much as I can and have been buying used Michelin AS3+ for the car. I have a pair of 245/45/18 for the rears that I got through ebay for $135. The 225/50/18s are harder to get.

 

245/45R18 is close to what OEM diameter is.

I have 245/45R18 in front and 275/40R18 in rear.
my wheel spec isn’t aggressive

i ran this for maybe 1.5 years

 

Looks good. What tire size & camber you running?
Im running bronze 19" TE37 Ultras.

 

hey fellow sedans.. anyone running 19x 9.5, 10.5 +25? also anyone that does wheel photoshop

 

About to put Q60's wheels on my G sedan. I heard that you need 10mm spacers. Is 15mm acceptable?

 

Looks amazing.

Is it possible to pull this off with an AWD?

 

These are Aodhan AFF7 19x9.5 +35 with an 8mm spacer to clear the Akebonos. Still on stock sport suspension but how much poke is too much 🤔.

I definitely need to lower my car to get these to fit better but I wasn't expecting this

I'm planning to run 255 square.

 

I run 245/40 upfront with the same size and offset. I am lowered but they sink in a bit. This offset will look fine, I was planning a 10-15mm spacer to bring them flush so you're fine

 

That's good news hah, what are you lowered on?

 

Silvers NEOMAX true-type coil overs

 

I am hoping you all could help me figure out which fitment would be best for my sedan.

I have a 2008 G35S that has the akebono sport brakes installed with Swift Springs.

I really love the look of the ESR RF2 wheels.

I can get them in 19x8.5 +30, 19x9.5 +35, 19x10.5 +30.

I am a fan of the staggered look but can't decide which sizes/offsets would be best. I would prefer to have as close to stock camber settings as possible. I feel like the 19x10.5 +30's on the rear would be too aggressive and wonder if the 19x8.5 +30's would clear the sport brakes. Would it be best to just run 19x9.5 +35's square?

Any insight would be appreciated!