Hii anyone know where to release the bleach from
the engine?

 

Bleach? Typo? If not I would start by draining the radiator and overflow tank.

 

Someone is pulling your leg or you're using the wrong word.

 

My apologies! I meant bleeder valve, I don’t think the G37 has it. Am I correct?
TIA

 

Bleeder valve for the engine coolant? G37 doesn't have one.

 

Yeah for the coolant. Thank you for the confirmation!

 

theres a bleeder valve on the uper driverside of the radiator on all 2nd gen G's. you have to remove the driver's side air intake box to get to it. Some earlier 2nd gen g's also have a bleeder valve on the passenger side heater hoses going from the back of the block to the heater core. behidn the block

 

Too bad there is no high point bleed. That's the most beneficial.

And I changed the thread title to reflect the actual inquiry.

 

i dont recall removing the airbox to removed the bleeder valve on the radiator. i could be wrong i did it so long ago. but if you want you can install a bleeder valve on the heater hose like the first gen (plastic one) or buy one from z1 its aluminium goes in the same spot