I want mine connected to the trunk pin.

 

dave

i would also leave the black wire alone and just move it to a different input.
i am in missouri visiting my parents so i dont have my 350z service manual, but i am flying back into tampa tomorrow so i can look into it better tomorrow night and report back with what i find might be the best fix.

 

yeh yeh yeh

thats what i use now
the bc garage works off a trial and error basis

which is not to say that i made an error in my previous installs (they all work correctly and will work), we just have found a better solution.

 

When is the BC garage going to be back in Orlando?

But wait, I'll be in Tampa/Clearwater this Saturday.

 

Yes Dan, mine is working fine....except that occasionally i hit lock twice and only the sunroof closes or only the window but 85% of the time both close

 

you might be hitting it too fast for the window
try and sow down your pulses a little bit and that shoudl take care of that

 

but one of them closes and the other doesnt.....how could it be the timing?

 

Thanks guys for all the replies, questions and suggestions... let me see if I can cover them all....

I'm using the truck/hatch pin for the trigger. I saw the warnings about the door pins drawing too much current so I went with the trunk pin.

Dan, you wrote "leave the black wire alone and just move it to a different input". What "it" are you referring to, the trigger? Or, the sensor itself? Is the steering column the recommended place now? Or, should I just try to get it farther away from the door (kick panel)?

Does it matter which orientation the sensor is mounted in?

I believe Dan's explanation about the door closing causing the sensor to ground the trigger and make the BCM think that the door/hatch is open is right on target. Since the black wire controls when the sensor "turns on", that's why I thought if it went on a delayed power, it would stay off for a few seconds more allowing me to close the door and have it not trip the trigger.

Dave

 

what i meant by that dave was maybe move teh trigger wire off the door pin to the trunk pin but it appears that you already have it on the trunk pin. you could try moving it to a different location that might help

no that doesnt matter
you can mount it however you want.

i think that would probably be the best thing dave but i am not sure where you would find that type of wire.
ill talk with kevin and see what we can come up with. like i said before i dont have my service manual with me since im at my parents.

 

When do I get mine installed?

 

whenever you come to my apartment.
if yu want to come by on thursday just give me a call.
the only thing i have planned now that jason isnt coming is goin to the track at 5

 

Oh who picking u up from the airport? My neighbor?

 

no
shes in cali

ryan actually picked me up

 

What a nice guy... and hair.

 

that he is

thanks again ryan

hit me up tomorrow when your on your way over