Engine, Drivetrain & Forced-Induction
Have Technical Questions or Done Modifications to the G37? Find out the answer in here!

ATF Drain and Fill Help, Fluid Spec

Old Jun 10, 2014 | 03:37 PM
  #1  
G37AL99's Avatar
G37AL99
Thread Starter
Registered User
 
Joined: Jun 2014
Posts: 15
Likes: 1
ATF Drain and Fill Help, Fluid Spec

I think I have most of this down but just making sure. I'd like to do a drain and fill on an 08 G37 5 AT I picked up. Mileage is 75k. Flush seems dangerous to me and IV had good luck with drain and fills in the past.

I believe if I'm correct I need 4-5 quarts of Nissan S Matic?

Any other info I need?

Need any plug gaskets or anything?
Reply
Old Jun 10, 2014 | 04:01 PM
  #2  
Redline37's Avatar
Redline37
Registered Member
iTrader: (2)
 
Joined: Jun 2009
Posts: 293
Likes: 11
From: SoCal
If I recall, 4 quarts came out when I drained mine. Just simply drain from the bottom plug, and refill from the dipstick. Replacing the drain pan copper washer would be recommended to prevent leaks.
Reply
Old Jul 6, 2014 | 11:29 PM
  #3  
jrb55gh's Avatar
jrb55gh
Registered Member
 
Joined: Jul 2014
Posts: 40
Likes: 7
From: DFW Texas
7AT fluid change

Changing the late model 7AT trans fluid requires a special tool and a specific procedure. It is described in the 2012 370z service manual available at:

https://www.dropbox.com/sh/bse3w8qwz3tuw9f/9DGHnXlN2W

My Nissan dealer wouldn't sell the tool to fill the transmission, so I made one. If you need more info PM me.
Reply
Old Jul 6, 2014 | 11:39 PM
  #4  
Glover998's Avatar
Glover998
Registered User
iTrader: (1)
 
Joined: Sep 2009
Posts: 414
Likes: 32
From: Oman.
^ guy drives 5AT
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vamarris
Engine, Drivetrain & Forced-Induction
3
Dec 9, 2018 11:10 AM
faze2988
Private Classifieds
9
Oct 7, 2015 12:05 AM
MrRiv
Engine, Drivetrain & Forced-Induction
0
Sep 29, 2015 04:59 PM
Murkr
Audio, Video & Electronics
4
Sep 28, 2015 10:45 AM
VIVID
Wheels & Tires
4
Sep 27, 2015 09:45 AM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:27 AM.