Engine, Drivetrain & Forced-Induction
Have Technical Questions or Done Modifications to the G37? Find out the answer in here!

Hypertech ECU

Old Apr 11, 2012 | 10:54 AM
  #1  
NewThoughts's Avatar
NewThoughts
Thread Starter
Registered User
 
Joined: Apr 2012
Posts: 8
Likes: 0
Hypertech ECU

So I just bought the Hypertech ECU tuner, my friend is big on engines and knows a-lot of information. So he will be tuning and installing it for me because he works at a DYNO. Now what exactly will this do for me will this gain horsepower and torque, or will it boost up the horsepower that my mods are sending out?
Reply
Old Apr 11, 2012 | 01:12 PM
  #2  
TheLocNar's Avatar
TheLocNar
Registered Member
iTrader: (5)
 
Joined: May 2009
Posts: 2,256
Likes: 66
From: Chicagoish
It's not a custom tuner. Plug it in and follow the directions. It flashes the ECU with their parameters. You will definitely notice a difference. More torque/hp, and the removal of the 0-60 throttle restriction.

Since you have a friend with a dyno, do some stock runs, and a few more after you lashed with the HT.
Reply
Old Apr 11, 2012 | 02:58 PM
  #3  
Espig37s's Avatar
Espig37s
Registered User
 
Joined: Sep 2011
Posts: 302
Likes: 0
From: Charlotte, NC
"It's not a custom tuner. Plug it in and follow the directions. It flashes the ECU with their parameters. You will definitely notice a difference. More torque/hp, and the removal of the 0-60 throttle restriction.

Since you have a friend with a dyno, do some stock runs, and a few more after you lashed with the HT."

+1. It is actually pretty noticeable as far as the removal of the restriction goes. Should have been this way stock, can actually spin the wheels pretty easily now. Not sure if I notice any power per se, but def feels quicker. Would love to see some dyno numbers, especially with this new intake option. I;m using the takeda option with a R2C.
Reply
Old Apr 11, 2012 | 03:41 PM
  #4  
dimsler's Avatar
dimsler
Registered Member
iTrader: (7)
 
Joined: Mar 2012
Posts: 270
Likes: 9
Originally Posted by efuseakay
It's not a custom tuner. Plug it in and follow the directions. It flashes the ECU with their parameters. You will definitely notice a difference. More torque/hp, and the removal of the 0-60 throttle restriction.

Since you have a friend with a dyno, do some stock runs, and a few more after you lashed with the HT.
Damn I had no idea we have a 0-60 throttle restriction.
Reply
Old Apr 11, 2012 | 04:00 PM
  #5  
Fresh Mobile's Avatar
Fresh Mobile
Registered User
 
Joined: May 2010
Posts: 202
Likes: 0
From: NY
0-60 trottle restriction is removed when you reset your ecu or do you have to tune it to remove that restriction??
Reply
Old Apr 12, 2012 | 05:36 AM
  #6  
hustlerj's Avatar
hustlerj
Registered User
 
Joined: Dec 2011
Posts: 167
Likes: 0
From: Boston
0-60 Throttle Restriction

The "selectable throttle restriction" tunes the engine control systems for better low speed performance without sacrificing driveability, but it does not disable the torque management completely. There are many different torque management systems active at any given time while driving. During our tuning development we altered most of these systems in different combinations to assess the impact on performance, and driveability. We took the best combination of those changes and combined them with further tuning to improve the overall performance and driveability under all driving conditions. The overall affect was so dramatic we felt that all customers would benefit more if the changes were user selectable rather than "forced."


http://hypertech.com/products-max-energy-sport.aspx


You need the max energy sport ecu tuner to remove it buddy

Originally Posted by Fresh Mobile
0-60 trottle restriction is removed when you reset your ecu or do you have to tune it to remove that restriction??

Last edited by hustlerj; Apr 12, 2012 at 06:29 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
r0cketm0nkey
General Tech Questions
17
Nov 23, 2015 03:34 AM
ben-g37s
Engine, Drivetrain & Forced-Induction
1
Sep 22, 2015 01:36 PM
Raffay Khan
Intake and Exhaust
6
Sep 14, 2015 10:47 PM
deky_
Private Classifieds
2
Sep 12, 2015 11:02 AM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:33 AM.