Installed Stillen Grounding Kit
Former Sponsor
Joined: Dec 2007
Posts: 211
Likes: 3
On our short term test vehicle that we have in the shop right now the bolt threads were a little bit rough. This prevented the supplied nut from slipping on easily. However, we were able to clean up the threads a little bit and persuade the nut to go on there. It didn't really require much persuasion as too much force could have damaged the bolt beyond repair.
Did the threads on your bolt seem a bit rough? Or were they completely clean?
Thread Starter
No Soliciting
iTrader: (4)
Joined: Mar 2008
Posts: 818
Likes: 3
From: Miami (Oye Meng)
OK, so I just installed the connector on the negative battery terminal and I think I see what might have been the issue...
On our short term test vehicle that we have in the shop right now the bolt threads were a little bit rough. This prevented the supplied nut from slipping on easily. However, we were able to clean up the threads a little bit and persuade the nut to go on there. It didn't really require much persuasion as too much force could have damaged the bolt beyond repair.
Did the threads on your bolt seem a bit rough? Or were they completely clean?
On our short term test vehicle that we have in the shop right now the bolt threads were a little bit rough. This prevented the supplied nut from slipping on easily. However, we were able to clean up the threads a little bit and persuade the nut to go on there. It didn't really require much persuasion as too much force could have damaged the bolt beyond repair.
Did the threads on your bolt seem a bit rough? Or were they completely clean?
Former Sponsor
Joined: Dec 2007
Posts: 211
Likes: 3
Thread Starter
No Soliciting
iTrader: (4)
Joined: Mar 2008
Posts: 818
Likes: 3
From: Miami (Oye Meng)
By the way, did you see my other thread on the Stillen front splitter. I got a number of people interested in that product too. I'm selling for you guys and I'm not even on the payroll. 
Former Sponsor
Joined: Dec 2007
Posts: 211
Likes: 3
Maybe mine is an isolated case. Let's wait and see if the others have the same problem. Obviously it's not a showstopper. By the way, did you see my other thread on the Stillen front splitter. I got a number of people interested in that product too. I'm selling for you guys and I'm not even on the payroll.
By the way, did you see my other thread on the Stillen front splitter. I got a number of people interested in that product too. I'm selling for you guys and I'm not even on the payroll. I haven't seen any threads on the front splitters but I have been receiving a lot of emails on them lately...You guys are just too fast for me haha.
Thread Starter
No Soliciting
iTrader: (4)
Joined: Mar 2008
Posts: 818
Likes: 3
From: Miami (Oye Meng)
Here's the Splitter thread.
https://www.myg37.com/forums/showthr...talled+stillen
It just took off. I got a bunch of PMs from people asking different questions about it.
https://www.myg37.com/forums/showthr...talled+stillen
It just took off. I got a bunch of PMs from people asking different questions about it.
Former Sponsor
Joined: Dec 2007
Posts: 211
Likes: 3
Here's the Splitter thread.
https://www.myg37.com/forums/showthr...talled+stillen
It just took off. I got a bunch of PMs from people asking different questions about it.
https://www.myg37.com/forums/showthr...talled+stillen
It just took off. I got a bunch of PMs from people asking different questions about it.
Let me see what I can do on the splitters...The only problem that might arise is that we are expecting a price increase from our material supplier on July 1st...It's a 25% increase to us and I know we're planning on raising the retail cost 10%...I'll see what I can do though.
