i tried to pop off my chrome spoiler today and i decided to go through it from the interior of the trunk. i couldnt remove this weird plastic screw thing which seemed to flimsy to pull out and fragile to turn. its found holding down the rug-thing to the ceiling of the trunk (bottom of the lid). its not one of those easy pop-off ones.
here are some pics.

does anyone know how to remove them?
also i have the reverse camera, is there anything thing i should know about yanking the wires/ disconnecting them before i actually do it?

 

might want to correct the spelling mistake in the title so that the right people come look in here.

 

edit: thanks admin for changing the name!
still... any help?

 

Removed mine many times
You must pull it hard to remove it. Don't worry you cannot broke it.

 

you can buy clip removal tool with "U" or "V" at the end... will save your clips and fingers..for few $..

 

These are for setting the trunk gap, you must measure the gap before removing these two. Pull hard...

 

I got thru the lining, but can't get the spoiler out... There are (2) easily removable nuts, and then (2) tabs that I cannot get to... anything else?

Anybody had any luck with this removal?

 

if i remember right, i think there's 4 nuts holding together and the rest should be just molding or double sided tape. try to look and see if there's 2 more nuts. good luck!

 

^ Yep... upon further investigation and a little head scratching I found all (4) nuts.

(2) in the middle and (2) more on the ends. Then there's white plastic tabs that weren't easily removed, but used a big flathead screwdriver and popped 'em out. Unscrew the back-up cam if you got one and voila!