Car Care & Detailing Washing, waxing, cleaning, caring.

Damn Tree Sap

Old Aug 30, 2012 | 09:50 AM
  #1  
sharkman's Avatar
sharkman
Thread Starter
Registered User
 
Joined: Dec 2011
Posts: 37
Likes: 0
Damn Tree Sap

I have some hardened tree sap on the hood of my 2012 G37XS Malbec Black. Someone recommended "Goof Off". I'm concerned that it might damage the paint.. Anyone got any suggestions? Or know if that product will hurt the paint job? Or another product that will take the sap off?


thanks
sharkman

Last edited by sharkman; Aug 30, 2012 at 03:22 PM.
Reply
Old Aug 30, 2012 | 10:20 AM
  #2  
Can'tGme's Avatar
Can'tGme
Registered User
iTrader: (1)
 
Joined: Aug 2011
Posts: 622
Likes: 16
From: Kentucky
My friend had some sap on his BO G35 and he said hand sanitizer started to get it off. Good luck.
Reply
Old Aug 30, 2012 | 12:44 PM
  #3  
AllReD's Avatar
AllReD
Registered User
 
Joined: Nov 2011
Posts: 47
Likes: 0
Had some on mine, I used TRIX and some fine clay (the clay wasn't totally necessary but went ahead just to make sure).. then just re-waxed the hood.

Nothing much too it.

I would image if you have some APC you might want to try different strength ratios, might save you a few bucks.
Reply
Old Aug 30, 2012 | 02:35 PM
  #4  
bluedevils95's Avatar
bluedevils95
Registered User
iTrader: (2)
 
Joined: Mar 2011
Posts: 1,833
Likes: 23
From: Torrance
I always just wash my car right after and it came off right away.
Reply
Old Aug 30, 2012 | 03:18 PM
  #5  
hinomura's Avatar
hinomura
Registered User
iTrader: (4)
 
Joined: Jun 2011
Posts: 249
Likes: 10
I used rubbing alcohol and it came right off. I believe this is why hand sanitizer works. I would lay a paper towel on the spots affected, pour the alcohol on the paper towel and let it sit for a few minutes to soften up the sap. Then wipe gently. I would then rinse the car off.
Reply
Old Aug 30, 2012 | 04:17 PM
  #6  
jujubii's Avatar
jujubii
Premier Member
iTrader: (5)
 
Joined: Jun 2010
Posts: 668
Likes: 7
From: SoCal
i had tree sap get on the glass window of my car. i tried every method from alcohol to clay (didnt completely remove everything and it was stilll sticky). the only thing that worked 100% was goo gone.

goo gone will remove your wax and will not be safe for the clear coat if left on too long. what i would advise i to get some googone on a microfiber and press the microfiber over the treesap. you are going to get the treesap to try and absorb the goo gone for a while and try to slowly wipe it away. just make sure you dont keep the goo goon for a really long time and wax afterwards
Reply
Old Aug 31, 2012 | 04:35 AM
  #7  
TOGWT's Avatar
TOGWT
Registered User
 
Joined: Jul 2007
Posts: 256
Likes: 5
From: London, UK / Ponte Vedra Beach, FL
“Removal of Tree Resin / Sap” - http://www.autopia.org/forum/autopia...ml#post1499766

I hope the information in this article is of some help to you. If you have any further questions please let me know
Reply
Old Aug 31, 2012 | 07:58 AM
  #8  
sharkman's Avatar
sharkman
Thread Starter
Registered User
 
Joined: Dec 2011
Posts: 37
Likes: 0
Thanks for the tips... I'll let you guys know what worked.. I'll work on it this weekend..


sharkman
Reply
Old Sep 4, 2012 | 09:54 AM
  #9  
sharkman's Avatar
sharkman
Thread Starter
Registered User
 
Joined: Dec 2011
Posts: 37
Likes: 0
Purell did the trick.. thanks everyone

sharkman
Reply
Old Mar 9, 2013 | 11:22 PM
  #10  
AG458's Avatar
AG458
Registered User
 
Joined: Mar 2013
Posts: 24
Likes: 0
Use very hot water on a microfiber cloth and it should take it right off.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dedmanchan
Newbie Corner
48
Oct 6, 2015 05:43 PM
drewfinity
Build Threads
8
Sep 25, 2015 04:08 PM
r0cketm0nkey
Engine, Drivetrain & Forced-Induction
11
Sep 18, 2015 10:16 AM
keoman5
G37 Sedan
10
Aug 25, 2015 12:36 AM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 11:19 AM.